Crestron TPS-XVGA-BV Operations & Installation Manual page 10

RGB Computer Interface Card for TPS/Tilt Panel
CAUTION: The TPS-XVGA-BV contains ESD sensitive devices.
Perform the following procedure while wearing a grounding strap that is
properly grounded or on a grounded work station to avoid damaging the
card and/or the touchpanel.
CAUTION: To minimize possible damage during shipping, the
TPS-XVGA-BV contains packing material between the fan assembly and
the card. The packing material must be removed to prevent over-heating
of the card during operation.
Remove Packing Material
CAUTION: To prevent over-heating of the card during operation, make
sure that the fan electrical connector has remained attached to the PCB
connector of the TPS-XVGA-BV.
6 RGB Computer Interface Card with Balanced Video for TPS/Tilt Panel: TPS-XVGA-BV
1. Carefully open the shipping box and remove the ESD
prevention bag that contains the TPS-XVGA-BV.
2. Carefully open the ESD prevention bag and remove the
TPS-XVGA-BV.
3. Refer to the diagram below. From the left-side of the card,
carefully remove the packing material from between the fan
assembly and the card.
4. Make sure that any pieces of packing material that may have
torn off during removal are not present in the fan assembly or
on the card.
Crestron TPS-XVGA-BV
Operations & Installation Guide - DOC. 5920