Table of Contents
Advertisement
Wall-Mounted Interface Module
AUDIO Pinouts
TYPE
Top
Front
To determine the location of pin 1, hold the cable so that the end of the
8-pin RJ-45 connector is facing away from you, with the clip side down
and the copper side up. The copper connector on the far left is pin 1.
Industry Compliance
As of the date of manufacture, the TPS-IMW has been tested and found
to comply with specifications for CE marking and standards per EMC
and Radiocommunications Compliance Labelling.
Setup
Network Wiring
CAUTION: Use only Crestron power supplies for Crestron equipment.
Failure to do so could cause equipment damage or void the Crestron
warranty.
CAUTION: Provide sufficient power to the system. Insufficient power
can lead to unpredictable results or damage to the equipment. Please use
the Crestron Power Calculator (www.crestron.com/dealer-
tech_resources/power_calculator.asp) to help calculate how much power
is needed for the system.
CAUTION: Possible equipment damage if miswired.
6 • Wall-Mounted Interface Module: TPS-IMW
PIN DESIGNATION
1
1
8
2
3
GND/Shield
4
5
6
GND/Shield
7
8
1
8
DESCRIPTION
L+
Left Input (Positive)
L-
Left Input (Negative)
Audio Input Ground/Shield
R+
Right Input (Positive)
R-
Right Input (Negative)
Mic Output Ground/Shield
M+
Mic Output (Positive)
M-
Mic Output (Negative)
Operations Guide – DOC. 5857A
Crestron TPS-IMW
Advertisement
Table of Contents
