Identity Codes - Crestron STX-1700C Operation Manual

2-way rf wireless touchpanel
Hide thumbs Also See for STX-1700C:
Table of Contents

Advertisement

Crestron STX-1700C
Operations Guide - DOC. 6226A

Identity Codes

The STX-1700C touchpanel uses three distinct types of identity (ID) codes for
recognition within a Cresnet system: Cresnet identity (Net ID), RF ID, and RF
CHANNEL. These codes are assigned to the touchpanel from the Cresnet Interface
Menu when the unit is configured. Refer to "Setup Menu" on page 8. For the
touchpanel to be identified within the Cresnet system, these assignments must match
assignments made in the SIMPL Windows project.
Net ID
Every equipment and user interface within the Cresnet system requires a unique Net
ID. These codes are two-digit hexadecimal number from 03 to FE. The Net ID of the
unit must match the Net ID specified in the SIMPL Windows program when
operating as a wired touchpanel (optional, recommended for testing). The Net ID is
used when the touchpanel is wired directly to the control system during uploading a
®
Crestron VisionTools
Pro-e (VT Pro-e) project or upgrading the touchpanel
firmware.
RF ID
Every STX-1700C touchpanel communicating with a Cresnet control system via a
STRFGWX requires a unique RF ID to secure RF communications. There are 15
useable codes for multiple touchpanel(s) ranging from 1 to F (hexadecimal number).
The RF ID of the unit must match the RF ID specified in the SIMPL Windows
program. For roaming details, refer to "Modifying a SIMPL Windows Project for
Roaming" on page 17.
RF CHANNEL
Each STX-1700C touchpanel communicating to the STRFGWX transceiver must
have a RF CHANNEL that matches the RF CHANNEL of the STRFGWX. There
are 16 possible RF CHANNELS ranging from 0 to F (hexadecimal number). Having
multiple channels available allows for multiple gateways, and therefore many
multiple touchpanels, to be used in a given project without signal interference.
NOTE: A single RF CHANNEL may be used by more than one STRFGWX when
multiple transceivers are used to expand the roaming capabilities of a touchpanel.
For more information, refer to the latest revision of STRFGWX Operations Guide
(Doc. 5811) available from the Crestron website (http://www.crestron.com/manuals).
2-Way RF Wireless Touchpanel
2-Way RF Wireless Touchpanel: STX-1700C • 7

Advertisement

Table of Contents
loading

Table of Contents