Firmware Upgrades - Crestron STX-1700C Operation Manual

Crestron STX-1700C
A firmware upgrade file has the
extension .csf
Operations Guide - DOC. 6226A
Select VTZ File
6. Disconnect the programming cable and the external power pack from
the touchpanel.
7. Close the Viewport, exit VT Pro-e, and disconnect the programming
cable from the PC and the control system.

Firmware Upgrades

To take advantage of all the available features, it is important that the unit contains
the latest firmware. Please check the Crestron website for the latest version of
firmware. Not every product has a firmware upgrade, but as Crestron improves
functions, adds new features, and extends the capabilities of its products, firmware
upgrades are posted. To upgrade the STX-1700C firmware, complete the following
steps.
1. Make sure that "Communication Settings" that begins on page 20 has
been performed. Suggested baud rate is 38400.
2. As shown on next page, select File Transfer | Update Touchpanel
Firmware from the Viewport menu.
Select Update Touchpanel Firmware
3. As shown on the next page, select the Net ID of the STX-1700C and
then click OK.
2-Way RF Wireless Touchpanel
2-Way RF Wireless Touchpanel: STX-1700C • 25