Table of Contents
Advertisement
2-Way RF Wireless Touchpanel
Programming Cable Specifications
22 • 2-Way RF Wireless Touchpanel: STX-1700C
1. Before making any connections to the touchpanel, verify that the
control system is properly connected to the PC (using an RS-232 DB9
straight-through cable, Crestron P/N CNSP-587) and powered on.
2. Attach the stereo connector end of the ST-CBL to the touchpanel.
3. Attach the network connector end of the ST-CBL to the connector
labeled NET on the control system.
4. Attach the appropriate external power pack or equivalent to touchpanel
and plug into outlet. At the PC, make sure that no programs accessing
the COM port of the PC are running.
5. Open the Crestron Viewport.
Either launch the stand-alone version of Viewport, or start SIMPL
Windows or VT Pro-e, and from the menu bar, select Tools |
Viewport.
6. From the Viewport menu, select Setup | Communications settings
(alternatively, press Alt+D) to open the "Port Settings" window. Refer
to the figures on the next page.
Crestron STX-1700C
Operations Guide - DOC. 6226A
Advertisement
Table of Contents
