Uploading A Vt Pro-E Project - Crestron STX-1700C Operation Manual

2-Way RF Wireless Touchpanel
A compiled VT Pro-e file has the
extension .vtz
24 • 2-Way RF Wireless Touchpanel: STX-1700C

Uploading a VT Pro-e Project

To upload a compiled VT Pro-e project to the STX-1700C, complete the following
steps.
1. Make sure that "Communication Settings" that begins on page 20 has
been performed.
2. As shown below, select File Transfer | Send Touchpanel
(alternatively, depress Alt+T) from the Viewport menu.
Select Send Touchpanel
3. As shown below, select the Net ID of the STX-1700C and then click
OK. The "Touchpanel Transfer" window appears (refer to the
following graphic).
"Select Network ID" Window
"Touchpanel Transfer" Window
4. Click Browse. The "Open" window appears as shown on the next page.
5. Select the VT Pro-e (vtz) file and click Open. The transfer completes
automatically.
Crestron STX-1700C
Operations Guide - DOC. 6226A