Identity Codes - Crestron MT-1000C Operation Manual

Crestron MT-1000C
Operations Guide – DOC. 6322A
MiniTouch Handheld Wireless Touchpanel
Docking Station Power Supply Hookup
Place the MT-1000C in the cradle of the docking station and press down until you
hear a click.
When the MT-1000C is properly seated on the docking station, the STATUS LED
lights up red while the battery is charging. The status LED turns blue when the
battery is fully charged.

Identity Codes

The MT-1000C touchpanel uses two distinct types of identity codes: RF ID and
IR ID. These codes are assigned to the touchpanel when the unit is configured in
VT Pro-e. For the touchpanel to be identified within the Cresnet system, these
assignments must match assignments made in the SIMPL Windows program.
RF ID
Every MT-1000C touchpanel communicating via RF with a Cresnet control system
through a CNRFGWA-418 gateway or directly to an MC2W control system requires
a unique RF ID. The RF ID is a two-digit hexadecimal number, limited to increments
of the most significant digit (i.e., 00, 10, 20), that can range from 00 to F0. The RF
ID of the unit, set in VT Pro-e, must match the RF ID specified in the SIMPL
Windows program.
MiniTouch Handheld Wireless Touchpanel: MT-1000C • 9