Setup; Applying Power; Identity Codes - Crestron ST-1700C Operation Manual

1-Way Wireless RF Touchpanel

Setup

6 • 1-Way Wireless RF Touchpanel: ST-1700C

Applying Power

The touchpanel can be powered via an external AC power pack, while resting in the
ST-DSN, or via the ST-BTPN. Each of these supplied items has its own Operations
Guide which details proper usage. Refer to the table below for the required document
number.
NOTE: The battery can be charged only if the touchpanel is in the docking station.
The touchpanel will function when powered by the external power pack, but this
configuration will not charge the battery.
ST-1700C Power Source Options
POWER SOURCE OPTION
Battery Pack
Docking Station
Domestic External Power Pack or
International External Power Pack
* The latest revision may have a revision letter after the document number (i.e., 6088A)

Identity Codes

The ST-1700C touchpanel uses two distinct types of identity codes: Cresnet identity
(NET ID), and RF ID. These codes are assigned to the touchpanel from the Interface
Submenu when the unit is configured. Refer to "Setup Menu" on page 7. For the
touchpanel to be identified within the Cresnet system, these assignments must match
assignments made in the SIMPL
NET ID
Every equipment and user interface within the Cresnet system requires a unique NET
ID. The NET ID is a two-digit hexadecimal number that can range from 03 to FE. The
NET ID of the unit must match the NET ID specified in the SIMPL Windows program.
The NET ID is used when the touchpanel is wired directly to the control system during
™
uploading a VisionTools
firmware.
RF ID
Every ST-1700C touchpanel communicating with a Cresnet control system via a
CNRFGWA requires a unique RF ID to secure RF communications. There are 15
useable codes for multiple touchpanel(s) ranging from 01 to 0F (hexadecimal number).
The RF ID of the unit must match the RF ID specified in the SIMPL Windows
program.
NOTE: Do not set the RF ID to "00"; it is not supported in SIMPL Windows.
MODEL
ST-BTPN
ST-DSN
PW-1215
PWI-1215
™ ®
Windows program.
Pro-e (VT Pro-e) project or upgrading the touchpanel
Operations Guide – DOC. 6050
Crestron ST-1700C
DOCUMENT
NUMBER *
6088
6095
5762
5763
.