Installing The Logset - Montigo Homefire Plus MD34-DV-2 Installation Operation & Maintenance

Modular gas fireplace
Hide thumbs Also See for Homefire Plus MD34-DV-2:
Table of Contents

Advertisement

MD34-DV-2 Homefire
Wiring for the optional Fan Kit
All 34 Series Modular fireplaces feature an optional fan kit for
circulating heat into the living space.
Installations in Canada which employ the fans must be electri-
cally grounded in accordance with CSA C22.1 Canadian Electrical
Code Part 1 and/or Local Codes.
Installations in the USA which employ the fans must be
grounded in accordance with local codes or, in the absence of local
codes, with the National Electrical Code, ANSI/NFPA 70-1987.
For more information see the Fan Kit Installation Guide included
with the fan kit.
NOTE:
If any of the original wire supplied with the appliance is replaced, it
must be replaced with the same type, or its equivalent.
L1-WH
G
L2-BLK
f i r e - p a r t s . c o m
Quick Connect
plug to motor
Figure 23a. Wiring for optional air circulating fan kit.
115/1/60 Supply
G
L1 L2
Figure 23b. Wiring schematic for optional fan kit.
Installing the Log Set
Installing the Logs:
The MD34-DV-2 is supplied with six ceramic fibre logs. Unpack the logs
and handle them very carefully.
1.
Remove the door cover and the glass door.
2.
Place the Back log onto the back log rest as shown below in
figure 24a. The log has lip on the bottom which fits into the
slot on the log rest.
Page 12
Installation
B a ck b u rn er tu be
B a ck log
Figure 24a.
3.
Place the Front log onto the front log rest as shown in figure
24a. Center the log from side to side, and push it against the
back of the log rest. Carefully push the log onto the metal
spikes on the log rest.
4.
Place the top logs in position as shown in figures 24b and
24c.
5.
Start the fireplace. If the flame appears satisfactory, replace
the glass door and door cover.
C en te r lo gs
Figure 24b.
B a ck lo g
Figure 24c.
E m be r tray
F ro nt b urne r tub e
F ro nt lo g
F ro nt lo g res t
B a ck lo g re st
Positioning for the front and back logs.
L e ft lo g
B a ck log
Proper top log placement (top view).
C en te r lo g s
R ig h t lo g
L e ft lo g
F ro n t lo g
Log placement as seen from the front of the stove.
R ig h t lo g
F ro n t lo g
Part No. XG0106B

Advertisement

Table of Contents
loading

Table of Contents