Table of Contents
Advertisement
INSTALLATION
Please read the important safety information at the start of this manual before you begin to install the
device.
The ideal position to locate the ST620 programmable thermostat is about 1.5m above floor level. It should
be mounted in a location where the thermostat is accessible, reasonably lit and free from extremes of
temperature and draughts. Do not mount the thermostat on an outside wall, above a radiator or in a
location where it may be subjected to direct sunlight.
The ST620 should be mounted in a location where it will not come into contact with moisture or
condensation, as this can affect the Touch Ring operation.
To ensure trouble free reception for both the Radio Controlled Clock (RCC) and the Radio Frequency (RF)
signal, always ensure that the programmable thermostat is mounted away from any possible sources of
interference (such as radios, TV sets, computers, etc.), and is not mounted on or in close proximity to large
metal objects. Installing the ST620 in enclosed areas such as cellars and basements is not recommended.
05
ST620ROF INSTRUCTION MANUAL
Advertisement
Table of Contents
