Salus ST620ROF Instruction Manual page 28

Programmable rf room thermostat with one touch energy saving override control

Table of Contents

TIME Function Radio Controlled Clock

The ST620 time and day of the week settings are updated automatically

every day (at 12:00 AM or 2:00 AM) by the use of a very accurate internal

Radio Controlled Clock.

The RCC status indicator will be displayed for 10 minutes during clock

updates. The indicator will flash during the time update process, after

which the indicator will be displayed for 5 minutes before turning off.

The time and date will also be automatically updated when the ST620 is

powered up, or after the Reset Button is pressed.

If for any reason the ST620 fails to automatically update the time setting,

then the data stored in the internal memory will be used. The clock

settings can also be changed manually if required – manual settings will

be overwritten at the next successful automatic update.

If the time and date setting need to be set manually,

this can be done by accessing the TIME menu. The

first option within the menu is a choice of 12 or 24

hour clock setting.

ST620ROF INSTRUCTION MANUAL

Table of Contents