Crestron QM-FTMCSC
Operations & Installation Guide – DOC. 6307A
FlipTop Media Center with Storage Compartment
1. Install the eight supplied #6-32 screws, but do not tighten (four on the
front side and four on the rear side). These will be used to secure the
front and rear mounting brackets.
2. Position the QM-FTMCSC in the mounting hole.
Mounting Bracket Screw Locations
3. Install the four #10 screws in the mounting brackets (two screws per
bracket). Refer to the following diagram.
4. Slide the mounting brackets over the #6-32 screws and tighten the
#6-32 screws.
5. Turn the four #10 screws equally until they contact the underside of the
mounting surface.
NOTE: Do not over-tighten the #10 screws as this may damage the surface
and/or the unit.
FlipTop Media Center with Storage Compartment: QM-FTMCSC • 21