Crestron QM-FTMCSC Operation And Installation Manual page 40

FlipTop Media Center with Storage Compartment
36 • FlipTop Media Center with Storage Compartment: QM-FTMCSC
QM-FTMCSC Basic Controls - Signal Descriptions (continued)
SIGNAL TYPE
AND NAME
Analog input:
< CompForComposite_Aud >
Analog output:
< CompForComposite_Aud_F >
Analog input:
< CompForSVideo_Aud >
Analog output:
< CompForSVideo_Aud_F >
NOTE: Use an Analog Initialize to send a decimal input signal to the symbol.
NOTE: Returned values match values that were selected for the <VidInput
Select> and <AudInput Select> inputs.
Microphone Controls
The Microphone Controls module is built into slot 02 of the QM-FTMCSC. The
unit provides two microphone/line level inputs labeled MIC 1/LINE 1 and MIC
2/LINE 2, with muting, phantom power, noise gating, and level monitoring. In
addition, auto-compensation models provide four bands of equalization (160Hz,
500Hz, 1.2kHz, and 3kHz).
The microphone audio is routed to the MIC 1 and MIC 2 channels of the QM
output together with video and stereo program audio.
Crestron QM-FTMCSC
DESCRIPTION
Sets the source gain compensation for the VIDEO audio
source.
Valid analog values range from -100d (-10dB) to +100d
(+10dB), adjustable in increments of 0.1dB (1d =
0.1dB).
Indicates the source gain compensation being applied
to the VIDEO audio source.
Sets the source gain compensation for the S-VIDEO
audio source.
Valid analog values range from -100d (-10dB) to +100d
(+10dB), adjustable in increments of 0.1dB (1d =
0.1dB).
Indicates the source gain compensation being applied
to the
S-VIDEO audio source.
Operations & Installation Guide - DOC. 6307A