Table of Contents
Advertisement
FlipTop Media Center with Storage Compartment
40 • FlipTop Media Center with Storage Compartment: QM-FTMCSC
NOTE: The gating level indicators will still function even if the gating function
is not enabled.
NOTE: Nominal indication is reported at 20 dB below input clip level. Clip
indication is reported at 6 dB below input clip level.
NOTE: Returned values match values that were selected for the
<Mic1GatingLevel>, <Mic2GatingLevel> <Mic1Gain>, <Mic2 Gain>,
<AttackTime> and <DecayTime> inputs.
NOTE: Refer to page 42 for adjustment details of the microphone inputs.
Buttons
The Buttons module is built into slot 03 of the QM-FTMCSC. It consists of a
keypad 10 to 20 buttons with LED indicators, and two bargraphs. The button
presses are fixed and map to <press> outputs on the symbol detail, as follows:
Row 1
1
2
Row 2
6
7
Row 3
11
12
Row 4
16
17
PWR
NET
NOTE: Numbers in this illustration are for programming purposes only.
NOTE: Not applicable to NB models.
The buttons on rows 1 and 2 can be combined vertically to form one larger
button. For example, the button caps for buttons #1 and #6 can be replaced with
one larger button cap. Similarly, the vertical pairs on rows 3 and 4 can be
combined to form one larger button. For example, buttons #13 and #18 can be
combined. No other combinations are valid. That is, two buttons cannot be
combined horizontally; the buttons on rows 2 and 3 cannot be combined.
QM-FTMCSC Symbol – Detail View of Buttons
Crestron QM-FTMCSC
3
4
5
8
9
10
13
14
15
18
19
20
Operations & Installation Guide - DOC. 6307A
Advertisement
Table of Contents
