Crestron QM-FTMCSC Operation And Installation Manual page 37

Crestron QM-FTMCSC FlipTop Media Center with Storage Compartment
C2Net-Device, Slot 5
Setting the Net ID in Device Settings
Double-click the QM-FTMCSC icon in the upper pane to open the "Device
Settings" window. This window displays QM-FTMCSC device information.
The Net ID can be changed in this window using the Net ID tab, as shown in the
following figure.
"Device Settings" Window
NOTE: This procedure sets the Net ID for the QM-FTMCSC in the program
only. It does not automatically set the Net ID for the QM-FTMCSC itself.
SIMPL Windows automatically changes Net ID values of a device added to a
program if a duplicate device or a device with the same Net ID already exists in
the program. Always ensure that the hardware and software settings of the Net
ID match. For Net ID hardware setting details, refer to "Identity Code" on page
15.
Symbols in Programming Manager
Three symbols make up the QM-FTMCSC: Basic Controls, Microphone
Controls, and Buttons. These symbols may be opened in Detail View. Following
each symbol, a table lists the symbol input and output signals, respectively, and
their functional description.
FlipTop Media Center with Storage Compartment: QM-FTMCSC • 33
Operations & Installation Guide – DOC. 6307A