E1/E20/E2/E2 Lite Additional Document
1.4
Supported Devices
Table 1-1 Supported Device List
Item
Target MCUs
Notes: 1. For details on the RL78-S1 core, refer to "RL78 Family User's Manual: Software".
2. When using other than the RL78/G10, RL78/G1M, RL78/G1N, refer to "E1/E20/E2 Emulator, E2 Emulator
Lite Additional Document for User's Manual (Notes on Connection of RL78) (R20UT1994)".
Table 1-2 Debugging Function List
Item
Memory reference or change during program execution
Pseudo-real-time RAM monitor
(RRM)
Dynamic Memory Modification
(DMM)
Event
Break
Software break
Hardware break
Forced break
Trace
Acquired information
Start event
End event
Performance
Measurement item
measurement
function
Performance
Hot plug-in
Coverage measurement function
Extended
Solution for the tuning
function of the
of current
E2*
consumption
External trigger
input/output
Note: When the low-voltage OCD board is in use, the extended functions of the E2 are not available.
R20UT2937EJ0301 Rev.3.01
Jul 1, 2020
RL78 Family (RL78-S1 Core) *1
RL78/G1x:
RL78/G10, RL78/G1M, RL78/G1N
Type of the RL78 Core
RL78-S1
Supported
Supported
2 points (max)
Not supported
Supported
Supported
Not supported
Not supported
Not supported
Supported
Supported
Not supported
Not supported
Supported
Supported
Description
Description
CPU is used when monitoring
CPU is used when changing
Can be used for hardware break
Execution address
Between start and stop of user program
execution
Resolution: 100 μs
Maximum measurement time: 119 hours
18 min
Current consumption by the user system
is measured when the power is supplied
from the E2.
External triggers can be input to or output
from the E2 expansion interface.
1.
Overview
Page 10 of 45