Renesas E1 User Manual page 6

E1/E20/E2/E2 Lite Additional Document
Terminology
Some specific words used in this user's manual are defined below.
Host machine
This means a personal computer used to control the emulator.
User system
This means a user's application system in which the MCU to be debugged is used.
User program
This means the program to be debugged.
Programming Software
In this document, this indicates Renesas Flash Programmer that can be used with the E1, E20, E2, or
E2 Lite.
"#" at the end of a pin name (signal name)
"#" at the end of a pin name (signal name) indicates that the pin (signal) is active low (e.g., RESET#).
Extended function of the E2
This means an extended function which is available with the E2 emulator.
E2 expansion interface
This means the interface required for extended functions of the E2 emulator.
R20UT2937EJ0301 Rev.3.01
Jul 1, 2020
Terminology
Page 6 of 45