Setting Starting Points; Stihl Imow App; Functions Of The Imow App - Stihl RMI 632 PC-L Instruction Manual

16 STIHL iMow App

15.6 Setting Starting Points

► Set starting points to target automatic mowing in a specific
part of your lawn. Starting points are used to access parts
of your lawn that are not being mowed frequently enough,
sometimes because part of the mowing area is accessible
only through a corridor.
Starting points can be set in two different ways.
"Teaching-in" starting points
Press the OK button. The robotic mower will begin to
travel along the perimeter wire. If it is not docked, it
first travels to the docking station. All current existing
starting points are deleted.
To teach-in up to 4 starting points:
► Save each starting point by pressing the OK button during
the robotic mower's travel around the perimeter wire.
► The teach-in procedure is interrupted automatically when
the robotic mower contacts obstacles along the perimeter
wire. If the teach-in procedure is interrupted, remove any
obstacles that may be found along the cutting path or
correct the installation of the perimeter wire.
► If necessary, interrupt the teach-in procedure manually by
pressing the STOP button.
► Check the position of the robotic mower before continuing
the teach-in procedure. The robotic mower must be
located on the perimeter wire or within the mowing area
facing the perimeter wire.
► The starting frequency defines how often a mowing
operation is to begin from a starting point. The default
setting is 2 of 10 mowing operations (2/10) at each starting
point. You can change the starting frequency as desired
after each teach-in.
► If the teach-in procedure has been ended prematurely,
send the robotic mower back the to docking station.
0478-131-3052-A
Setting starting points 1 to 4 manually:
Press the OK button. All existing starting points are
deleted.
To manually set up to 4 starting points:
► Determine the distance of the starting points from the
docking station, measured in a clockwise direction.
► Set a starting frequency between 0 of 10 mowing
operations (0/10) and 10 of 10 mowing operations (10/10).
The docking station is defined as starting point 0. Mowing
operations will start from the docking station as a default.
Setting a mowing radius
The robotic mower can be programmed to mow concentric
circles around a specified starting point. Each starting point
can be assigned a radius from 10 ft. to 100 ft. (3 m to 30 m),
which will be mowed before the robotic mower moves on to
other areas of the yard.
16 STIHL iMow App

16.1 Functions of the iMow App

This robotic mower can be programmed and operated using
the STIHL iMow U.S. mobile and web apps ("iMow App"),
available on the App Store
download to your mobile device, tablet or computer.
1
Apple, the Apple logo, iPhone, and iPad are trademarks of Apple
Inc., registered in the U.S. and other countries and regions. App
Store is a service mark of Apple Inc.
2
Google Play and the Google Play logo are trademarks of Google
LLC.
English
®1 2
and on Google Play™ for
61