Safety - Stihl RMI 632 PC-L Instruction Manual

15 Settings
Edge mowing
Select the mowing frequency for edges.
► Select one of three options:
– Never: The edges will never be mowed.
– Once (default): The edges will be mowed once a week.
– Twice: The edges will be mowed twice a week.
Secondary areas
Enable or disable secondary areas.
► Activate to enable mowing of a secondary area.

15.4 Safety

Disab. device
To activate the disabling device in the "Settings"
menu, open the "Safety" submenu, select "Lock
iMow" and confirm by pressing the OK button.
To deactivate the disabling device, press the Mow
button and the OK button in the sequence illustrated
on the display. Once the disabling device is
deactivated, the robotic mower can be operated
again.
Level
Four security levels can be set. Various locks and
security devices are activated, depending on the
level.
► Select one of four options:
1) None: All functions of the robotic mower can be
accessed.
2) Low:
– Anti-theft alarm: If the mower is lifted or tilted for
longer than 10 seconds, the PIN query appears. If you
do not enter then PIN code within one minute, an
alarm sounds and automatic operation is switched off.
0478-131-3052-A
– Connection lock: The PIN code must be entered prior
to linking of the robotic mower and docking station.
– Reset lock: The PIN code must be entered prior to
resetting the machine to the factory defaults.
3) Medium:
– All of the features from the "Low" setting.
– Time lock: PIN code query for changing a setting if no
PIN code has been entered for more than one month.
4) High:
– All of the features from the "Medium" setting.
– Setting protection: The PIN code must be entered
before settings can be changed.
► Select the desired security level and confirm it by pressing
the OK button.
► If necessary, enter the 4-digit PIN code.
STIHL recommends that the "Low", "Medium" or "High"
security level be set.
GPS protection
To activate the GPS protection feature.
For theft detection, STIHL recommends activating the GPS
protection feature.
Change PIN code
The 4-digit PIN code can be changed if necessary.
The "Change PIN code" menu item is only displayed
in the "Low," "Medium" or "High" settings.
► Enter the old PIN code and confirm it by pressing the OK
button.
► Enter the new 4-digit PIN code and confirm it by pressing
the OK button.
Take note of your PIN code and keep it in a safe place. If the
PIN code is entered incorrectly 5 times, automatic operation
is switched off and can only be restored with a master code
generated by your authorized STIHL iMow servicing dealer.
English
59