Stihl RMI 632 PC-L Instruction Manual page 36

Table of Contents

Advertisement

Available languages

Available languages

English
out of the mowing area. Never allow the robotic mower to
operate if you know that animals or persons are or may be
in the mowing area or vicinity, @ 5.6.3.
WARNING
Observe all applicable laws, regulations, standards and
ordinances when programming active times. Set and adjust
active times after completing the initial installation, @ 14.6.
2000 ft²
2500 ft²
3000 ft²
► Select the size of your lawn and confirm it by pressing the
OK button on the control panel / manual controller.
Restricted areas and secondary areas must not be
included when calculating the size of the mowing area.
The robotic mower automatically calculates a mowing plan
based on the size of the lawn and the length of the perimeter
wire.
When the robotic mower has finished calculating the mowing
plan, the display shows the message "Confirm each day
individually or change active time."
► To end the calculation of the mowing plan, push the STOP
button.
34
► Press the OK button on the control panel / manual
controller to approve or change the active times. Before
modifying active times, see @ 14.5.
The active times for Monday are displayed and the menu
item "Confirm active times" is highlighted.
► Confirm all active times by pressing the OK button on the
control panel / manual controller. The display will show the
next day's mowing plan for you to approve or modify.
In the case of small mowing areas, mowing may not be
necessary every day. In this case, no active times will be
displayed, and the menu item "Delete all active times" is
not available. Days without active times must also be
confirmed by pressing the OK button on the control panel
/ manual controller.
Next to each menu item, one of the following symbols is
displayed:
The displayed active times can be changed. Select
the time interval to be changed using the navigation
pad and open it by pressing the OK button on the
control panel / manual controller, @ 14.6.
Additional active times can be programmed. Select
the menu item "New active time" and open it by
pressing the OK button on the control panel / manual
controller.
Select up to three active times per day with their start
and end times in the selection window. Confirm it by
pressing the OK button on the control panel / manual
controller.
10 Installing the Robotic Mower
0478-131-3052-A

Advertisement

Chapters

Table of Contents
loading

Table of Contents