Installing The Oxygen Bottle Holder; Installing The Foley Bag Basket - Stryker SV2 Operation Manual

Installing the oxygen bottle holder

WARNING
Do not use accessories to support patient limbs or other body parts.
CAUTION
• Always make sure that accessories are locked into position.
• Do not use the oxygen bottle holder as a push or pull device.
• Always turn the oxygen bottle holder in toward the bed before transporting a patient.
• Do not strike the oxygen bottle holder while transporting a patient.
• Do not allow accessories to interfere with mechanical or electric mechanisms of the product.
To install the oxygen bottle holder:
1. Insert the oxygen bottle holder into one of the two accessory sleeves near the head end
2. Rotate and lock the oxygen bottle holder into the accessory sleeve

Installing the Foley bag basket

WARNING
Do not use accessories to support patient limbs or other body parts.
www.stryker.com
Accessories
Figure 1-27: Installing the oxygen bottle holder
Figure 1-28: Locking the oxygen bottle holder
KK-7500 REV 02
(Figure 1-27 on page
(Figure 1-28 on page 1-39).
English
EN
1-39).
1-39