Stryker SV1 Maintenance Manual
  1. Manuals
  2. Brands
  3. Stryker Manuals
  4. Medical Equipment
  5. SV1
  6. Maintenance manual
Stryker SV1 Maintenance Manual

Stryker SV1 Maintenance Manual

Electric hospital bed
Hide thumbs Also See for SV1:
Table of Contents

Advertisement

Quick Links

SV1 Electric Hospital Bed
7100
Maintenance Manual
2017/01
SM-7100 REV 01
www.stryker.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SV1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Stryker SV1

Summary of Contents for Stryker SV1

  • Page 1 SV1 Electric Hospital Bed 7100 Maintenance Manual 2017/01 SM-7100 REV 01 www.stryker.com...
  • Page 2 sample text...
  • Page 3 Warning; crushing of feet Do not insert lift pole Headboard and footboard orientation Do not store items under the bed. Gatch positioning Caster lock Catalogue number Serial number CE mark Manufacturer Safe working load Maximum patient weight www.stryker.com SM-7100 REV 01...
  • Page 4 Equipment (WEEE), this symbol indicates that the product must not be disposed of as unsorted municipal waste, but should be collected separately. Contact your local distributor for disposal information. See the maintenance manual for servicing instructions and recyclable components. SM-7100 REV 01 www.stryker.com...

  • Page 5: Table Of Contents

    Head end siderail hoop replacement ..................... 62 Foot end siderail hoop replacement ...................... 63 Brake system ............................64 Base and leg assembly..........................66 Litter / frame assembly..........................68 Bumper roller assembly ..........................70 Bed extender assembly ..........................71 Hi-Lo actuators ............................73 www.stryker.com SM-7100 REV 01...
  • Page 6 Gatch (legrest) actuator ........................... 81 Siderail head end assembly........................82 Siderail assembly ............................ 84 Siderail foot end assembly ........................85 Siderail release latch assembly ........................86 Headboard and footboard assembly ......................87 Recycling passports..........................88 EMC information ............................. 98 SM-7100 REV 01 www.stryker.com...

  • Page 7: Warning/Caution/Note Definition

    Note: Provides special information to make maintenance easier or important instructions clearer. www.stryker.com SM-7100 REV 01...

  • Page 8: Summary Of Safety Precautions

    Portable and mobile RF communications equipment can produce electromagnetic interference with SV1. To prevent interference caused by portable and mobile RF communications equipment, maintain a minimum distance between portable and mobile communications equipment and SV1 according to the EMC section of this operations manual. •...

  • Page 9: Pinch Points

    Summary of safety precautions Pinch points Figure 1: SV1 pinch points www.stryker.com SM-7100 REV 01...

  • Page 10: Introduction

    Stryker continually seeks advancements in product design and quality. This manual contains the most current product information available at the time of printing. There may be minor discrepancies between your product and this manual. If you have any questions, contact Stryker Customer Service or Technical Support at + 90 (352) 321 43 00 (pbx).
  • Page 11 2000 mm x 860 mm x 120 mm 7002-5-712 2000 mm x 860 mm x 120 mm Operation Storage and transportation Environmental conditions (50 °C) Temperature (-10 °C) Relative humidity 1060 hPa 1060 hPa Atmospheric pressure 800 hPa 800 hPa www.stryker.com SM-7100 REV 01...
  • Page 12 Portable and mobile RF communications equipment can produce electromagnetic interference with SV1. To prevent interference caused by portable and mobile RF communications equipment, maintain a minimum distance between portable and mobile communications equipment and SV1 according to the EMC section of this operations manual. SM-7100 REV 01...

  • Page 13: Product Illustration

    Siderail control panel (Inside siderail) (option) Casters (Dual-wheel casters optional) Siderail control panel (Outside siderail) (option) CPR release Siderail latch Foley hooks Upper leg section Nurse control pendant (not shown) Footboard Patient control pendant (option) (not shown) Headboard www.stryker.com SM-7100 REV 01...

  • Page 14: Contact Information

    Introduction Contact information Contact your Stryker Customer Service: Stryker Medical International Kayseri Serbest Bölge Şubesi 2. Cad. No:17 38070 Kayseri, Turkey E-mail : infosmi@stryker.com Phone : + 90 (352) 321 43 00 (pbx) Fax: + 90 (352) 321 43 03 www.mukametal.com...

  • Page 15: Cleaning

    Using a clean, soft, damp cloth, wipe product surfaces with a mild soap and water solution to remove foreign material. Wipe product surfaces with a clean, dry cloth to remove any excess liquid or cleaning agent. Dry thoroughly. www.stryker.com SM-7100 REV 01...

  • Page 16: Cleaning The Siderails

    Do not use acid-based chemicals or flammable chemicals, such as gasoline, diesel, or acetone for cleaning purposes. To clean the siderails: Raise the siderail. Latch the siderail. Use a clean, soft, damp cloth to wipe down the siderail and the siderail control panel. Allow the siderail control panel to dry thoroughly. SM-7100 REV 01 www.stryker.com...

  • Page 17: Disinfecting

    To disinfect mechanisms, lift the backrest and leg rest up to the highest height. Wipe product surfaces and mechanisms with a clean, dry cloth to remove any excess liquid or cleaning agent. Allow the product to dry completely before returning to service. www.stryker.com SM-7100 REV 01...

  • Page 18: Preventive Maintenance

    Preventive maintenance At a minimum, check all items listed during annual preventive maintenance for all Stryker Medical products. You may need to perform preventive maintenance checks more frequently based on your level of product usage. Remove product from service before performing preventive maintenance. Preventive maintenance should only be performed by trained or certified personnel.
  • Page 19 Preventive maintenance Product serial number: Completed by: Date: www.stryker.com SM-7100 REV 01...

  • Page 20: Quick Reference Replacement Parts

    Quick reference replacement parts These parts are currently available for purchase. Call Stryker Customer Service: 1-800-327-0770 for availability and pricing. Name Number Chassis, upper backrest YM-008-013-LM-BY Chassis, upper chassis leg rest YM-007-006-BY YM-006-003-BY Chassis, upper middle Control unit, siderail HM-17-310...
  • Page 21 Q11 capped snap ring DT/6673/44A HM-12-905 Transfer laser cut part bushing (bronz) YM-FUTURELBPDL- Future LB pedal 001-BY white YM-HM-02-62 Red brake rubber MKA062 DMR062 YM-HM-02-63 Green brake rubber MKA063 DMR063 YM-HM-02-71 12 thick PLS washer DMR071 www.stryker.com SM-7100 REV 01...
  • Page 22 2946UAP150R36- wheel non steer (150 32S30 D RAL 9002 mm), see Brake 4XM6 TENTE 150 system on page 64 mm double lockable caster (Stryker) HM-05-106 M6*16 imbus bolt HM-09-04 6 mm serrated washer (ring) DIN 6798 HM-11-10 11 mm snap ring...
  • Page 23 6798 HM-11-10 11 mm snap ring (lipper) KMS starlock push on BV/6706 fastener HM-11-20 Q11 capped snap ring DT/6673/44A YM-HM-02-71 12 thick PLS washer DMR071 YM-HM-02-299 50*50 caster profile cap PLS (lower chasis PLS) 51 mould www.stryker.com SM-7100 REV 01...
  • Page 24 YM-KIT-100033 YM-FTRBASLIK-MN1 Future polypropylene logo, dark blue, see bed head and foot Headboard and assembly footboard assembly HM-20-850 Dark blue (Stryker) on page 87 foot end bed head color sticker with Stryker logo Headboard kit, dark YM-KIT-100005-B YM-FTRBASLIK-MN1 Future polypropylene...
  • Page 25 Kit name Number Kit contents Quantity Number Name Label kit, dark blue YM-KIT-100032 HM-20-850 Dark blue (Stryker) foot end bed head color sticker with Stryker logo HM-20-851 Dark blue (Stryker) head color sticker HM-20-852 Dark blue (Stryker) upper right siderail...
  • Page 26 3M primer 94 handkerchief Nurse control YM-KIT-100017 HM-16-03 Ø25 clips (UB250C- pendant kit N 245X4, 6 cable connector) HM-17-103 0964541 Linak supervisor spiral cable HM-17-175 AC0062-00_SV1/CL Stryker logo nurse control unit (supervisor) HM-17-186 00911045 ACO snap ring SM-7100 REV 01 www.stryker.com...
  • Page 27 YM-KIT-100019 HM-16-03 Ø25 clips (UB250C- replacement kit, type N 245X4, 6 cable connector) HM-17-225 912151-B black energy cable (Stryker) B type cable Power cord YM-KIT-100020 HM-16-03 Ø25 clips (UB250C- replacement kit, type N 245X4, 6 cable connector) HM-17-011 D type energy cable...
  • Page 28 84 side rail pin HM-18-27 Future side rail shock absorber 640015004 HM-05-018 M8*90 half thread steel bolt YM-HM-02-418 Future side rail shock absorber PLS HM-07-03 M8 iron washer HM-08-06 M8 fibered nut HM-20-557 Ø15 clips SM-7100 REV 01 www.stryker.com...
  • Page 29 (DT/6668/44A) HM-12-144 12-144 10 x 128 mm siderail pin HM-12-145 12-145 10 x 305 mm siderail pin HM-20-855 Dark blue (Stryker) lower left siderail color sticker Siderail kit, foot end YM-KIT-100013-D YM-02-142-MN Left foot siderail left, dark wood, see...
  • Page 30 6 mm C shape snap ring DIN 6799 HM-11-19 Q10 capped snap ring (DT/6668/44A) HM-12-144 12-144 10 x 128 mm siderail pin HM-12-145 12-145 10 x 305 mm siderail pin HM-20-757 07 wood color future siderail color foot left SM-7100 REV 01 www.stryker.com...
  • Page 31 (DT/6668/44A) HM-12-144 12-144 10 x 128 mm siderail pin HM-12-145 12-145 10 x 305 mm siderail pin HM-20-854 Dark blue (Stryker) lower right siderail color sticker Siderail kit, foot end YM-KIT-100014-D YM-02-144-MN Right foot siderail right, dark wood, see...
  • Page 32 6 mm C shape snap ring DIN 6799 HM-11-19 Q10 capped snap ring (DT/6668/44A) HM-12-144 12-144 10 x 128 mm siderail pin HM-12-145 12-145 10 x 305 mm siderail pin HM-20-756 07 wood color future siderail color foot right SM-7100 REV 01 www.stryker.com...
  • Page 33 12-145 10 x 305 mm siderail pin YM-HM-02-418 Future siderail shock absorber PLS HM-05-018 M8*90 half thread steel bolt HM-20-557 Ø15 clips HM-07-03 M8 iron washer HM-08-06 M8 fibered nut HM-20-853 Dark blue (Stryker) upper left siderail color sticker www.stryker.com SM-7100 REV 01...
  • Page 34 12-145 10 x 305 mm siderail pin YM-HM-02-418 Future siderail shock absorber PLS HM-05-018 M8*90 half thread steel bolt HM-20-557 Ø15 clips HM-07-03 M8 iron washer HM-08-06 M8 fibered nut HM-20-760 08 dark wood future siderail color back left SM-7100 REV 01 www.stryker.com...
  • Page 35 12-145 10 x 305 mm siderail pin YM-HM-02-418 Future siderail shock absorber PLS HM-05-018 M8*90 half thread steel bolt HM-20-557 Ø15 clips HM-07-03 M8 iron washer HM-08-06 M8 fibered nut HM-20-750 06 light wood future siderail color back left www.stryker.com SM-7100 REV 01...
  • Page 36 12-145 10 x 305 mm siderail pin YM-HM-02-418 Future siderail shock absorber PLS HM-05-018 M8*90 half thread steel bolt HM-20-557 Ø15 clips HM-07-03 M8 iron washer HM-08-06 M8 fibered nut HM-20-755 07 wood color future siderail color back left SM-7100 REV 01 www.stryker.com...
  • Page 37 12-145 10 x 305 mm siderail pin YM-HM-02-418 Future siderail shock absorber PLS HM-05-018 M8*90 half thread steel bolt HM-20-557 Ø15 clips HM-07-03 M8 iron washer HM-08-06 M8 fibered nut HM-20-852 Dark blue (Stryker) upper right siderail color sticker www.stryker.com SM-7100 REV 01...
  • Page 38 12-145 10 x 305 mm siderail pin YM-HM-02-418 Future siderail shock absorber PLS HM-05-018 M8*90 half thread steel bolt HM-20-557 Ø15 clips HM-07-03 M8 iron washer HM-08-06 M8 fibered nut HM-20-759 08 dark wood future siderail color back right SM-7100 REV 01 www.stryker.com...
  • Page 39 12-145 10 x 305 mm siderail pin YM-HM-02-418 Future siderail shock absorber PLS HM-05-018 M8*90 half thread steel bolt HM-20-557 Ø15 clips HM-07-03 M8 iron washer HM-08-06 M8 fibered nut HM-20-749 06 light wood future siderail color back right www.stryker.com SM-7100 REV 01...
  • Page 40 12-145 10 x 305 mm siderail pin YM-HM-02-418 Future siderail shock absorber PLS HM-05-018 M8*90 half thread steel bolt HM-20-557 Ø15 clips HM-07-03 M8 iron washer HM-08-06 M8 fibered nut HM-20-754 07 wood color future siderail color back right SM-7100 REV 01 www.stryker.com...
  • Page 41 12-145 10 x 305 mm siderail pin YM-HM-02-418 Future siderail shock absorber PLS HM-05-018 M8*90 half thread steel bolt HM-07-03 M8 iron washer HM-08-06 M8 fibered nut HM-20-853 Dark blue (Stryker) upper left siderail color sticker www.stryker.com SM-7100 REV 01...
  • Page 42 12-145 10 x 305 mm siderail pin YM-HM-02-418 Future siderail shock absorber PLS HM-05-018 M8*90 half thread steel bolt HM-07-03 M8 iron washer HM-08-06 M8 fibered nut HM-20-760 08 dark wood future siderail color back left SM-7100 REV 01 www.stryker.com...
  • Page 43 12-145 10 x 305 mm siderail pin YM-HM-02-418 Future siderail shock absorber PLS HM-05-018 M8*90 half thread steel bolt HM-07-03 M8 iron washer HM-08-06 M8 fibered nut HM-20-750 06 light wood future siderail color back left www.stryker.com SM-7100 REV 01...
  • Page 44 12-145 10 x 305 mm siderail pin YM-HM-02-418 Future siderail shock absorber PLS HM-05-018 M8*90 half thread steel bolt HM-07-03 M8 iron washer HM-08-06 M8 fibered nut HM-20-755 07 wood color future siderail color back left SM-7100 REV 01 www.stryker.com...
  • Page 45 12-145 10 x 305 mm siderail pin YM-HM-02-418 Future siderail shock absorber PLS HM-05-018 M8*90 half thread steel bolt HM-07-03 M8 iron washer HM-08-06 M8 fibered nut HM-20-852 Dark blue (Stryker) upper right siderail color sticker www.stryker.com SM-7100 REV 01...
  • Page 46 12-145 10 x 305 mm siderail pin YM-HM-02-418 Future siderail shock absorber PLS HM-05-018 M8*90 half thread steel bolt HM-07-03 M8 iron washer HM-08-06 M8 fibered nut HM-20-759 08 dark wood future siderail color back right SM-7100 REV 01 www.stryker.com...
  • Page 47 12-145 10 x 305 mm siderail pin YM-HM-02-418 Future siderail shock absorber PLS HM-05-018 M8*90 half thread steel bolt HM-07-03 M8 iron washer HM-08-06 M8 fibered nut HM-20-749 06 light wood future siderail color back right www.stryker.com SM-7100 REV 01...
  • Page 48 12-145 10 x 305 mm siderail pin YM-HM-02-418 Future siderail shock absorber PLS HM-05-018 M8*90 half thread steel bolt HM-07-03 M8 iron washer HM-08-06 M8 fibered nut HM-20-754 07 wood color future siderail color back right SM-7100 REV 01 www.stryker.com...

  • Page 49: Troubleshooting

    Battery is possibly discharged and 1. Battery is completely discharged 1. Recharge the battery. does not give click sound: 2. Battery is damaged or expired. 2. Battery should be replaced, call the service center. www.stryker.com SM-7100 REV 01...
  • Page 50 2. Plug in the power cord and turn on the battery. 3. Run each upper actuator to its highest position. SM-7100 REV 01 www.stryker.com...
  • Page 51 7. Failure mode does not result in a position lost. Make sure that the system is in a safe position after resetting the failure mode. 8. Continue to troubleshoot through possible causes until corrected. www.stryker.com SM-7100 REV 01...

  • Page 52: Service

    Raise the product to the highest height position. Power down the bed and unplug the power cord from the wall outlet. Remove the three cable routing covers that secures the gatch (legrest) actuator cable to the litter. SM-7100 REV 01 www.stryker.com...

  • Page 53: Head End Lift Actuator Replacement

    10. Using one hand, support the head end lift actuator and remove the foot end clevis pin (E) (Figure 4 on page 50). 11. Remove and discard the head end lift actuator. 12. Reverse steps to reinstall. www.stryker.com SM-7100 REV 01...

  • Page 54: Foot End Lift Actuator Replacement

    Using diagonal pliers, cut the cable tie that secures the foot end lift actuator cable. Discard the cable tie. Using a small flat screwdriver, gently push in both locking tabs to remove the cable retainer on the foot end lift actuator electrical connector. SM-7100 REV 01 www.stryker.com...
  • Page 55 (Figure 5 on page 51). 11. Remove and discard the foot end lift actuator. 12. Reverse steps to reinstall. 13. Verify proper operation of the product before returning it to service. Figure 5: Foot end lift actuator www.stryker.com SM-7100 REV 01...

  • Page 56: Non-Steer Caster Replacement

    Always make sure to line the hex shaft with the hex in the caster. Test the caster to identify the direction of the brake. Damage may occur if you install the caster incorrectly. 11. Verify proper operation of the product before returning it to service. SM-7100 REV 01 www.stryker.com...

  • Page 57: Steer (Head Left) Caster Replacement

    Use a small floor jack to lift the base frame cross tube to loosen the non-steer caster. Grasp the opposite brake/steer pedal and pull outward about eight inches to remove and discard the head left steer caster. 10. Reverse steps to reinstall. www.stryker.com SM-7100 REV 01...

  • Page 58: Head End Siderail Gas Cylinder Replacement

    55). Remove the pivot pin (B) (Figure 8 on page 55). Remove and discard the head end siderail gas cylinder. Reverse steps to reinstall. 10. Verify proper operation of the product before returning it to service. SM-7100 REV 01 www.stryker.com...

  • Page 59: Foot End Siderail Gas Cylinder Replacement

    56). Remove and discard the pivot pin (B) and foot end siderail gas cylinder (C) (Figure 9 on page 56). Reverse steps to reinstall. 10. Verify proper operation of the product before returning it to service. www.stryker.com SM-7100 REV 01...

  • Page 60: Brake / Steer Pedal Replacement

    (Figure 10 on page 57). Remove and discard the brake/steer pedal (D) (Figure 10 on page 57). Reverse steps to reinstall. Verify proper operation of the product before returning it to service. SM-7100 REV 01 www.stryker.com...

  • Page 61: Lower Leg Section Locking Mechanism Replacement

    (Figure 11 on page 58). Remove and discard the lower leg section locking mechanism (B) (Figure 11 on page 58). Reverse steps to reinstall. 10. Verify proper operation of the product before returning it to service. www.stryker.com SM-7100 REV 01...

  • Page 62: Patient Control Pendant Replacement

    Unplug the patient control pendant cable from the junction box. Dispose of the patient control pendant. Reverse steps to reinstall. Verify proper operation of the product before returning it to service. Nurse control pendant replacement Tools required: • Diagonal pliers SM-7100 REV 01 www.stryker.com...

  • Page 63: Siderail Control Panel (Inside And Outside Siderail) Replacement

    Raise and lock the lower leg section in the highest position. Using a small flat screwdriver, un-clip the actuator cable retainer (A) from the control box (Figure 12 on page 60). Remove and save the actuator cable retainer. www.stryker.com SM-7100 REV 01...

  • Page 64: Battery Replacement

    Using a #2 Phillips screwdriver, unscrew the four screws (A) that secure the battery to the litter frame (Figure 13 on page 61). Note: Support the battery while removing the screws so the battery does not fall. SM-7100 REV 01 www.stryker.com...

  • Page 65: Power Cord Replacement

    Using a small flat screwdriver, push in on the power cord lock and gently pull outward on the power cord. Remove and discard the power cord from the control box. Reverse steps to reinstall. Verify proper operation of the product before returning it to service. www.stryker.com SM-7100 REV 01...

  • Page 66: Head End Siderail Hoop Replacement

    Note: Support the siderail hoop while removing the screws so the siderail hoop does not fall. 13. Remove and discard the siderail hoop. 14. Reverse steps to reinstall. 15. Verify proper operation of the product before returning it to service. Figure 14: Head end siderail hoop SM-7100 REV 01 www.stryker.com...

  • Page 67: Foot End Siderail Hoop Replacement

    Note: Support the siderail hoop while removing the screws so the siderail hoop does not fall. Remove and discard the siderail hoop. 10. Reverse steps to reinstall. 11. Verify proper operation of the product before returning it to service. Figure 15: Foot end siderail hoop www.stryker.com SM-7100 REV 01...

  • Page 68: Brake System

    Quantity Item Number Name HM-01-26 150 mm standard twin caster HM-01-25 150 mm directional lock twin caster HM-05-106 M6*16 imbus bolt HM-09-04 6 mm serrated washer (ring) DIN 6798 YM-HM-02-299 50 x 50 caster profile cap SM-7100 REV 01 www.stryker.com...
  • Page 69 6 X 20 mm steel bolt HM-12-905 Transfer laser cut part bushing (bronz) HM-07-22 M6 iron washer (small) HM-08-05 M6 fibered nut YM-FUTURELBPDL-001- Future LB pedal white YM-HM-02-62 Red brake rubber MKA062 DMR062 YM-HM-02-63 Green brake rubber MKA063 DMR063 www.stryker.com SM-7100 REV 01...

  • Page 70: Base And Leg Assembly

    HM-02-285 Ø10.6 x 7.5 mm plastic washer HM-11-03 10 mm snap ring DIN 471 HM-05-153 Ø10 x 35 mm button head bolt HM-02-283 2 mm plastic washer (10 mm plastic washer) mould NO 34 SM-7100 REV 01 www.stryker.com...
  • Page 71 Number Name HM-12-FTR007 Ø10.2 mm plastic bushing YM-HM-02-398 Ø14.5 x 8 mm plastic washer YM-04-FTR011-HZR-BY Timing link YM-HM-02-399 Ø14 x 2 mm plastic washer HM-09-18 M10 rivet nut HM-08-07 M10 fiber hex nut YM-FUTURELBALT-002- Base assembly www.stryker.com SM-7100 REV 01...

  • Page 72: Litter / Frame Assembly

    HM-08-07 M10 fiber hex nut HM-07-07 Ø4 iron washer HM-06-02 Ø3.9 x 15 mm YM-16-49-03 380 mm cable routing cover YM-16-49-01 530 mm cable routing cover YM-16-49-02 660 mm cable routing cover HM-22-61 660 mm ? SM-7100 REV 01 www.stryker.com...
  • Page 73 300 x 18 x 16 mm footrest bumper HM-20-840 Bed extender pin YM-HM-02-401 Delrin C spacer HM-12-FTR004 12-FTR004 10 x 53 actuator pin HM-02-285 Ø10 x 7.5 mm plastic washer HM-11-03 10 mm snap ring DIN 471 www.stryker.com SM-7100 REV 01...

  • Page 74: Bumper Roller Assembly

    YM-04-322-HZR-1 (right side) Detachable bumper chassis to main chassis YM-04-322-HZR connection arm (left side) 45 x 2 x 150 mm bumper YM-03-01-01-01250-HZR chassis side tubes Main bumper profile 40 x YM-03-02-41-877-HZR1 60 x 877 mm SM-7100 REV 01 www.stryker.com...

  • Page 75: Bed Extender Assembly

    Plastic linen tray YM-UZTMSLTTC-001 Bolster mattress retainers HM-06-82 M14 x 12 mm Phillips screw YM-UZTMCIRT-MN Bolster mattress Velcro® HM-06-63 M14 x 16 mm Phillips screw YM-HM-02-413 Accessory socket sleeve HM-02-354 Future bumper HM-12-FTR001 12-FT001 future bumper www.stryker.com SM-7100 REV 01...
  • Page 76 Litter frame plastic end caps YM-HM-02-415 Bed extender block stops YM-04-FTR023-HZR-BY HPL extension mounting bracket YM-04-FTR022-HZR-BY HPL extension mounting bracket HM-06-02 Ø3.9 x 13 mm Phillips screw HM-08-19 M4 x .7 nylock nut HM-03-04-03-0650-HZR- Ø8 mm linen tray bar SM-7100 REV 01 www.stryker.com...

  • Page 77: Hi-Lo Actuators

    J03648 (31410H +1115004K CB16 Linak HM-17-100 high/low actuator) 10 mm snap ring DIN 471 HM-11-03 12-FTR004 10 x 53 HM-12-FTR004 actuator pin 10 x 7.5 mm plastic washer HM-02-285 12-112 Ø10 x 39.5 mm HM-12-112 stepped pin www.stryker.com SM-7100 REV 01...

  • Page 78: Control Box And Battery

    (CB6S674+X4409) CB6663- 00 100-240 volt HM-05-010 M6*50 steel bolt HM-08-05 M6 fibered nut HM-17-174 Control box mounting bracket HM-06-02 3.9 x 13 mm pan head self drilling screw HM-07-01 M6 metal standard washer (large) 1/4 washer SM-7100 REV 01 www.stryker.com...

  • Page 79: Litter Fowler (Backrest) Assembly

    Red plastic CPR release handle HM-05-032 M8 x 20 mm countersunk bolt HM-06-30 M5 x 15 mm self drilling star bolt YM-15-05-0450-HZR1 X-Ray cassette track HM-08-06 M8 fibered nut HM-07-03 M8 iron washer HM-05-018 M8*90 half thread steel bolt www.stryker.com SM-7100 REV 01...
  • Page 80 Ø5.5 x 19mm torque screw HM-05-005 Ø10 x 35 mm hex head bolt 4 YM-HM-02-88 Ø10 mm plastic bushing HM-07-04 M10 iron washer HM-08-07 M10 fiber hex nut HM-06-89 M10 x 55 mm carriage bolt YM-FUTURELBUST-001- Litter frame weldment SM-7100 REV 01 www.stryker.com...

  • Page 81: Litter Seat Assembly

    Litter seat assembly Quantity Item Number Name HM-02-120 Plastic seat cover YM-FUTURELBUST-001- Litter frame weldment www.stryker.com SM-7100 REV 01...

  • Page 82: Litter Gatch (Legrest) Assembly

    HM-07-04 M10 iron washer HM-02-283 2 mm plastic washer (10 mm plastic washer) mould NO 34 HM-06-89 M10 x 55 mm carriage bolt YM-HM-02-88 Ø10 mm plastic bushing HM-05-005 M10 x 35 mm hex head bolt SM-7100 REV 01 www.stryker.com...
  • Page 83 Number Name HM-06-88 M8 x 47 mm carriage bolt HM-07-03 M8 iron washer HM-08-06 M8 fibered nut HM-06-66 M6 x 15 mm button head screw YM-HM-02-55 Ø9 x 12.4 mm plastic screw YM-FUTURELBUST-001- Litter frame weldment www.stryker.com SM-7100 REV 01...

  • Page 84: Fowler (Backrest) Actuator

    Fowler (backrest) actuator Quantity Item Number Name 312887-00 future LB release backrest actuator HM-17-248 Linak type 10 mm snap ring DIN 471 HM-11-03 12-FTR004 10 x 53 HM-12-FTR004 actuator pin SM-7100 REV 01 www.stryker.com...

  • Page 85: Gatch (Legrest) Actuator

    HM-11-03 12-FTR004 10 x 53 HM-12-FTR004 actuator pin 12-FTR006 calf pin HM-12-FTR006 10 x 14 mm plastic washer HM-02-287 2 mm plastic washer (10 HM-02-283 mm plastic washer) mould NO 34 HM-02-285 7 mm PLS washer www.stryker.com SM-7100 REV 01...

  • Page 86: Siderail Head End Assembly

    NO 34 HM-12-145 12-145 10 x 305 mm siderail pin HM-12-144 12-144 10 x 128 mm siderail pin Number (left) Number (right) Siderail laminate Dark blue HM-20-853 HM-20-852 Dark wood HM-20-760 HM-20-759 SM-7100 REV 01 www.stryker.com...
  • Page 87 Siderail head end assembly Number (left) Number (right) Siderail laminate Light wood HM-20-750 HM-20-749 Wood HM-20-755 HM-20-754 www.stryker.com SM-7100 REV 01...

  • Page 88: Siderail Assembly

    12-144 10 x 128 mm HM-12-144 siderail pin 8 mm snap ring HM-11-04 Future side rail shock HM-18-27 absorber 640015004 12-146 8 x 31 mm side rail HM-12-146 Q8 capped snap ring HM-11-18 (DT/6671/43A) Siderail plastic main YM-HM-02-369 mechanism housing SM-7100 REV 01 www.stryker.com...

  • Page 89: Siderail Foot End Assembly

    12-144 10 x 128 mm siderail pin YM-20-006 Foot end left siderail YM-20-008 Foot end right siderail Number (left) Number (right) Siderail laminate Dark blue HM-20-855 HM-20-854 Dark wood HM-20-762 HM-20-761 Light wood HM-20-752 HM-20-751 Wood HM-20-757 HM-20-756 www.stryker.com SM-7100 REV 01...

  • Page 90: Siderail Release Latch Assembly

    Ø5 x 98 mm siderail pin HM-12–147 with snap ring slides HM-06–14 Ø3.5 x 13 mm Star screw Hammer spring HM-16–51 Siderail mechanism plastic HM-02-370 cover HM-02-374 Siderail release handle HM04-FTR007 Siderail release hammer Siderail mechanism plastic HM-02-369 shell SM-7100 REV 01 www.stryker.com...

  • Page 91: Headboard And Footboard Assembly

    Ø18 x 4 mm head pipe HM-12-150 Head or foot board YM-20-013 polypropylene Headboard laminate Number Dark blue HM-20-851 Dark wood HM-20-763 Light wood HM-20-753 Wood HM-20-758 Footboard laminate Number Dark blue HM-20-850 Dark wood HM-20-763 Light wood HM-20-753 Wood HM-20-758 www.stryker.com SM-7100 REV 01...

  • Page 92: Recycling Passports

    Recycling passports Assembly part number: HM-17-164 (Reference only) Recycling/Material Code Important Item HM-17-164 Power cable SM-7100 REV 01 www.stryker.com...
  • Page 93 Assembly part number: HM-17-373 (Reference only) Recycling/Material Code Important Quantity Item Control panel HM-17-373 www.stryker.com SM-7100 REV 01...
  • Page 94 Assembly part number: HM-17-16 (Reference only) Recycling/Material Code Important Quantity Item Battery HM-17-16 SM-7100 REV 01 www.stryker.com...
  • Page 95 Assembly part number: HM-17-156 (Reference only) Recycling/Material Code Important Quantity Item Multi-junction box HM-17-156 www.stryker.com SM-7100 REV 01...
  • Page 96 Assembly part number: YM-26-31 (Reference only) Recycling/Material Code Important Quantity Item Siderail control panel YM-26-31 SM-7100 REV 01 www.stryker.com...
  • Page 97 Assembly part number: HM-17-168 (Reference only) Recycling/Material Code Important Quantity Item Nurse control pendant HM-17-168 www.stryker.com SM-7100 REV 01...
  • Page 98 Assembly part number: HM-17-219 (Reference only) Recycling/Material Code Important Quantity Item Patient control pendant HM-17-219 SM-7100 REV 01 www.stryker.com...
  • Page 99 Assembly part number: HM-17-100 (Reference only) Recycling/Material Code Important Quantity Item HM-17-100 Hi-lo actuator HM-17-100 Hi-lo actuator www.stryker.com SM-7100 REV 01...
  • Page 100 Assembly part number: HM-17-248 (Reference only) Recycling/Material Code Important Quantity Item Fowler / backrest actuator HM-17-248 SM-7100 REV 01 www.stryker.com...
  • Page 101 Assembly part number: HM-17-249 (Reference only) Recycling/Material Code Important Quantity Item Leg rest actuator HM-17-249 www.stryker.com SM-7100 REV 01...

  • Page 102: Emc Information

    EMC information Guidance and Manufacturer’s Declaration - Electromagnetic Emissions SV1 is intended for use in an electromagnetic environment specified below. The customer or the user of SV1 should assure that it is used in such an environment. Compliance Electromagnetic Environment...
  • Page 103 Guidance and Manufacturer’s Declaration - Electromagnetic Immunity SV1 is suited for use in the electromagnetic environment specified below. The customer or the user of SV1 should assure that it is used in such an environment.
  • Page 104 EMC information (Continued) Portable and mobile RF communications equipment should be used no closer to any part of SV1, including cables, than the recommended separation distance calculated from the equation appropriate for the frequency of the transmitter. Recommended separation distance D=(1.2) (√P)
  • Page 105 To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which SV1 is used exceeds the applicable RF compliance level above, SV1 should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating SV1.
  • Page 106 Stryker Medical Kayseri Serbest Bölge Şubesi 2. Cad. No:17 38070 Kayseri, Turkey MADE IN TURKEY Stryker Medical 3800 E. Centre Avenue Portage, MI 49002 2017/01 www.stryker.com SM-7100 REV 01...

Table of Contents

Save PDF