Stryker 3002 Operation Manual
  1. Manuals
  2. Brands
  3. Stryker Manuals
  4. Medical Equipment
  5. 3002
  6. Operation manual

Stryker 3002 Operation Manual

Patriot series
Hide thumbs Also See for 3002:
Table of Contents

Advertisement

Quick Links

Download this manual
S3™ MedSurg Bed
Model 3002
Patriot™ Series
Operations Manual
For parts or technical assistance call:
1-800-327-0770
2011/03
3006-109-101 REV A.2
www.stryker.com

Advertisement

Table of Contents
loading

Related Manuals for Stryker 3002

Summary of Contents for Stryker 3002

  • Page 1 S3™ MedSurg Bed Model 3002 Patriot™ Series Operations Manual For parts or technical assistance call: 1-800-327-0770 2011/03 3006-109-101 REV A.2 www.stryker.com...

  • Page 3: Table Of Contents

    Intended Use – Stryker S3™ ........
  • Page 4 International Warranty Clause............. 3006-109-101 REV A www.stryker.com...

  • Page 5: Symbols And Definitions

    This icon means the iBed Locator is connected. This icon means the iBed Locator is not connected. This icon means the Network is connected. This icon means the Network is not connected. Return To Table of Contents www.stryker.com 3006-109-101 REV A...

  • Page 6: Warning/Caution/Note Definition

    Note This provides special information to make maintenance easier or important instructions clearer. Return To Table of Contents 3006-109-101 REV A www.stryker.com...

  • Page 7: Introduction

    Introduction This manual is designed to assist you with the operations of the S3™ MedSurg Bed, Model 3002 Patriot™ Series. Read it thoroughly before using the equipment. INTENDED USE – STRYKER S3™ This device is an AC-powered adjustable hospital bed intended for medical purposes that consists of a bed with a built-in motor and remote controls that can be operated by the patient to adjust the height and surface contour of the bed.

  • Page 8: Mattress Specifications

    Atmospheric Pressure 700 hPa 500 hPa Stryker reserves the right to change specifications without notice. Specifications listed are approximate and may vary slightly from unit to unit or by power supply fluctuations. Return To Table of Contents 3006-109-101 REV A...

  • Page 9: Product Illustration

    Introduction PRODUCT ILLUSTRATION Patient Headboard Control Panel Siderail Nurse Control Panel Footboard Control Panel Steer Pedal (not shown) Brake Siderail Release Pedal Handle Footboard Caster Return To Table of Contents www.stryker.com 3006-109-101 REV A...

  • Page 10: Contact Information

    Stryker Medical 3800 E. Centre Avenue Portage, Michigan 49002 Please have the serial number (A) of your Stryker product available when calling Stryker Customer Service or Technical Support. Include the serial number in all written communication. SERIAL NUMBER LOCATION The serial number is located at the head end of the bed just below the headboard and above the power cord where it comes out from the frame.

  • Page 11: Summary Of Safety Precautions

    Attempting to move the bed laterally when the steer pedal is activated may cause injury to the user. • The S3™ MedSurg Bed, Model 3002 Patriot™ Series is not intended for use with patients less than two years of age.
  • Page 12 • Bed may be equipped with an integrated scale intended to weigh the patient in bed. If the scale output is being used to determine diagnosis and treatment, please consult with a medical professional and/or additional weight references. • Scale accuracy specifications do not apply for patients under 20 lbs. Return To Table of Contents 3006-109-101 REV A www.stryker.com...

  • Page 13: Ibed ® Awareness Option

    Locator, thus providing incorrect bed location information. CAUTION • Wireless bed only transmits bed information and not nurse call information. The wireless bed is not intended to replace the existing nurse call system. Return To Table of Contents www.stryker.com 3006-109-101 REV A...

  • Page 14: 115V Option

    • To avoid risk of electrical shock, unplug all power cords before opening the service compartment, junction box or receptacle. • Do not use the optional 115V outlet for life sustaining equipment. Return To Table of Contents 3006-109-101 REV A www.stryker.com...

  • Page 15: Setup Procedures

    To prevent permanent damage to this unit, the unit must reach room temperature prior to conducting any setup and/or unit operations. It is important that the S3™ MedSurg Bed, Model 3002 Patriot™ Series is working properly before it is put into service. The following list will help ensure that each part of the bed is tested.

  • Page 16: Ibed Wireless Option

    5212 iBed Locator refer to the instruction sheet (part number 5212-009-101) packaged with your optional 5212 iBed Locator Installation kit. If any problems are found during the iBed Locator Installation, contact Stryker Technical Support at (800) 327−0770. WARNING • The iBed Locator must be correctly associated or mapped to the room / location in order to provide accurate...

  • Page 17: Base Operation Guide

    Attempting to move the bed laterally when the steer pedal is activated may cause injury to the user. Return To Table of Contents www.stryker.com 3006-109-101 REV A...

  • Page 18: Litter Operation Guide

    Clean Velcro AFTER EACH USE. Saturate Velcro with disinfectant and allow disinfectant to evaporate. (Appropriate disinfectant for nylon Velcro should be determined by the hospital.) Return To Table of Contents 3006-109-101 REV A www.stryker.com...

  • Page 19: Positioning Siderails

    To change the control panel light settings, press the “Menu” button on the footboard. Scroll down through the menu items and select “Backlight” then press “Enter”. Select the desired setting by highlighting it and then pressing “Enter”. Return To Table of Contents www.stryker.com 3006-109-101 REV A...

  • Page 20: Operating I.v. Poles

    Rotate the I.V. hangers (B) to desired position and hang I.V. bags. To lower the I.V. pole turn the latch (C) clockwise until section (A) lowers. CAUTION The maximum safe working load for each I.V. pole is 40 pounds. Return To Table of Contents 3006-109-101 REV A www.stryker.com...

  • Page 21: Night Light Usage

    If the bed is equipped with the optional CPR board, it is stored on the bed’s headboard. To remove it, pull it away from the headboard using both hands and lift it out of storage position. Return To Table of Contents www.stryker.com 3006-109-101 REV A...

  • Page 22: Siderail Operation Guide

    Note: The intent of the nurse call light on the siderails is to ensure the patient immediately knows which button to push to contact the nurse station. Turning the light off may compromise this ability, especially in a darkened room. Return To Table of Contents 3006-109-101 REV A www.stryker.com...

  • Page 23: Patient Control Functions Without Optional Smart Tv (Inside Siderail)

    Fowler Up Press to raise the Fowler. Fowler Down Press to lower the Fowler. Knee Gatch Down Press to lower the Knee Gatch. Knee Gatch Up Press to raise the Knee Gatch. Return To Table of Contents www.stryker.com 3006-109-101 REV A...

  • Page 24: Patient Control Functions With Optional Smart Tv (Inside Siderail)

    Fowler Up Press to raise the Fowler. Fowler Down Press to lower the Fowler. Knee Gatch Down Press to lower the Knee Gatch. Knee Gatch Up Press to raise the Knee Gatch. Return To Table of Contents 3006-109-101 REV A www.stryker.com...

  • Page 25: Patient Tv Channel Control Functions With Optional Smart Tv (Inside Siderail)

    Press to mute TV volume. Mute TV Press again to turn the sound back on. Press to display the closed captioning. Closed Caption Press again to turn off the closed captioning. Return To Table of Contents www.stryker.com 3006-109-101 REV A...

  • Page 26: Footboard Operation Guide

    Menu Patient Bed Up/ Knee Gatch Down Menu Up Down Lock Trend Cardiac Chair Menu Down Reverse Trend CPR Drop Exit Bed/Litter Up Bed Exit Arm/Disarm Enter Bed Exit Zone Control Return To Table of Contents 3006-109-101 REV A www.stryker.com...

  • Page 27: Footboard Control Panel Functions

    Cardiac Chair approximately 60 degrees and the bed will tilt to approximately -10 Reverse Trendelenburg (foot end down). Activates electronic CPR function; flattens litter and puts bed in low CPR Drop height. Return To Table of Contents www.stryker.com 3006-109-101 REV A...
  • Page 28 Scroll Up through menu. Menu Down Scroll Down through menu. Exits or Escapes from menu selection; also used to Cancel Exit operations. Enter Selects menu item; also used to Save operations. Return To Table of Contents 3006-109-101 REV A www.stryker.com...

  • Page 29: Led Indicators: Footboard

    AMBER flashes if a Bed Exit event occurs. Zone 3 LED: LED is illuminated when Bed Exit is “On” and Zone 3 activated; AMBER flashes if a Bed Exit event occurs. Return To Table of Contents www.stryker.com 3006-109-101 REV A...
  • Page 30 Awareness): LED is illuminated if iBed ® AMBER Awareness system is “On”. The LED will blink when siderail state has changed. Power LED: LED is illuminated when bed has power. GREEN Return To Table of Contents 3006-109-101 REV A www.stryker.com...

  • Page 31: Display Screens

    • As required message screens are provided during alarm conditions and user interaction with the bed. E. Main Menu • The Menu screen provides of list of available features accessible to the operator. Return To Table of Contents www.stryker.com 3006-109-101 REV A...

  • Page 32: Optional Chaperone Bed Exit

    XPRT, do not initialize (“Arm”) bed exit with Percussion, Vibration, Rotation or Turn Assist active. The patient motion and position resulting from a dynamic therapy mattress may adversely affect bed exit system performance. Return To Table of Contents 3006-109-101 REV A www.stryker.com...

  • Page 33: Chaperone Bed Exit With Zone Control

    If the patient’s center of gravity moves from the original location more than 1 inch to either side or 1 inch toward the head or foot, an alarm will sound. NOTE All zone dimensions are ± .5 inches. Return To Table of Contents www.stryker.com 3006-109-101 REV A...

  • Page 34: Optional Scale System

    • Do not zero bed scales or weigh patient with Percussion, Vibration, Rotation or Turn Assist active. Patient motion and position resulting from the dynamic therapy mattress may adversely affect scale system performance. Return To Table of Contents 3006-109-101 REV A www.stryker.com...
  • Page 35 “Unable to Zero - Try Again” if unsuccessful. If the problem continues after three attempts, the scale system will lock and the scale monitor will read: “Unable to Zero”. Return To Table of Contents www.stryker.com 3006-109-101 REV A...
  • Page 36 NOTE: Refer to Figure 6 • If the Gain or the Loss exceeds 99.9 lb, then the system will display ‘---’ instead of a value. Figure 6 Return To Table of Contents 3006-109-101 REV A www.stryker.com...
  • Page 37 - Press “Exit” to cancel operation. • If “Enter” is pressed, the message “Do Not Touch Bed” will flash on the display. • If “Exit” is pressed, “Patient Weight Changed” message will display. Return To Table of Contents www.stryker.com 3006-109-101 REV A...
  • Page 38 • Scroll through the 10 Tone Patterns listed in the menu. A sample alarm will sound for each Tone Pattern highlighted. • Select desired Tone Pattern and Press “Enter” • “Save Successful” message will be displayed. Return To Table of Contents 3006-109-101 REV A www.stryker.com...
  • Page 39 • Select “On” to Enable or “Off” to disable and then press “Enter” • “Save Successful” message will be displayed. 8. Exit Menu Exits Main Menu screen and returns display to the default Status Screen. Return To Table of Contents www.stryker.com 3006-109-101 REV A...

  • Page 40: Ibed ® Awareness Functionality

    The following message will be displayed on the screen: “Awareness On”. Turning off the iBed ® Awareness system Press and hold the iBed On/Off button. The following message will be displayed on the screen: “Awareness Off”. Return To Table of Contents 3006-109-101 REV A www.stryker.com...

  • Page 41: Ibed ® Awareness Monitoring And Alarms

    17 and the message in Figure 18. Figure 18 Figure 17 Note The arrow pointing to the siderail in Figure 17 and 18 will change depending on the siderail position in alarm. Return To Table of Contents www.stryker.com 3006-109-101 REV A...

  • Page 42: Bed Exit

    • If the caregiver would like to set the Awareness alarm to the Nurse Call Station, the “Status To N/C” must be turned “On” through the Advanced Options Menu in the Main Menu. Note • By default these two advanced options are turned “Off”. Return To Table of Contents 3006-109-101 REV A www.stryker.com...

  • Page 43: Ibed ® Awareness Locks

    • If any of the Patient Control lock buttons are pressed, Figure 29 as shown above will be displayed. • If any of the Patient Control lock buttons are pressed when already “on” then Figure 30 as shown above will be displayed. Return To Table of Contents www.stryker.com 3006-109-101 REV A...

  • Page 44: Optional Pendant Operation Guide

    Press to raise head section. Press to raise knee section. Press to lower knee section. Press to lower head section. Press to turn on/off room lights Press to turn on/off reading lights Return To Table of Contents 3006-109-101 REV A www.stryker.com...

  • Page 45: Optional Infrared (Ir) Module

    Wireless (WiFi) Connection LED Slow Flash - WiFi attempting to connect. Solid LED = WiFi connected. Rapid Flash - WiFi was not connected after 6 minutes and timed out. Return To Table of Contents www.stryker.com 3006-109-101 REV A...

  • Page 46: Optional Ibed Locator

    Installation and operational procedures for the Optional iBed Locator are located in the iBed Locator Instructions For Use manual (5212-009-101). Item Name Function IR (Infrared) Lens Provides Infrared communications with the iBed IR Module. Return To Table of Contents 3006-109-101 REV A www.stryker.com...
  • Page 47 Notes Return To Table of Contents www.stryker.com 3006-109-101 REV A...

  • Page 48: Preventative Maintenance

    _____ Check labels as specified in the Operations and Maintenance manuals for legibility, proper adherence and integrity. _____ Confirm iBed ® Wireless Module and IR Module are intact and footboard icons are displaying (iBed ® Wireless Option) Bed Serial Number: Completed by: _______________________________________ Date: ___________________ Return To Table of Contents 3006-109-101 REV A www.stryker.com...

  • Page 49: Grease Points

    Apply Mobile #28 grease to entire length of ball screw. If dry, apply a thin film layer of Syn-Tech grease (p/n 3000-200-700) to the outside of the brake spring. Ball Screw Brake Spring Return To Table of Contents www.stryker.com 3006-109-101 REV A...

  • Page 50: Product Labels

    Note: All product labels are standard on the bed unless otherwise noted as being optional. Part Name/Number Product Label Specification Label 3006-300-625 Shock Hazard 3006-002-708 Steer Lock 3006-090-013 Base Logo 3006-200-602 Explosion hazard. Do not use in the presence of flammable anesthetics. Caution/Danger Label 5212-100-807 Return To Table of Contents 3006-109-101 REV A www.stryker.com...
  • Page 51 Note: All product labels are standard on the bed unless otherwise noted as being optional. Part Name/Number Product Label Caution 3006-088-820 500 lb Max 3006-090-100 Cord Out Label 3006-090-028 Brake Pedal 3006-200-601 Foley Bag Hook 3006-300-601 Return To Table of Contents www.stryker.com 3006-109-101 REV A...
  • Page 52 Note: All product labels are standard on the bed unless otherwise noted as being optional. Part Name/Number Product Label Fowler Elevation Angle 3006-300-602 CPR Release 3006-300-603 Release Handle 3006-400-657 Warning 3006-400-656 Oxygen Warning 3006-508-010 Return To Table of Contents 3006-109-101 REV A www.stryker.com...
  • Page 53 Product Labels Note: All product labels are standard on the bed unless otherwise noted as being optional. Part Name/Number Product Label For hospital staff use only 3006-508-013 Stryker Logo 3006-508-014 Night Light 3006-310-601 Head End Inner Siderail (Left) 3006-400-620 Head End Inner...
  • Page 54 Nurse Call and Lights (Left) 3006-400-625 (Optional) Head End Inner Siderail with Nurse Call and Lights (Right) 3006-400-615 (Optional) Head End Inner Siderail with Nurse Call, Lights and TV-Radio (Left) 3006-400-623 (Optional) Return To Table of Contents 3006-109-101 REV A www.stryker.com...
  • Page 55 (Left) 3006-430-131 (Optional) Head End Inner Siderail with Smart TV (Right) 3006-430-132 (Optional) Head End Outer Siderail with Cardiac Chair (Left) 3006-400-637 Head End Outer Siderail with Cardiac Chair (Right) 3006-400-647 Return To Table of Contents www.stryker.com 3006-109-101 REV A...
  • Page 56 Cardiac Chair and Gatch/Fowler (Left) 3006-400-634 (Optional) Head End Outer Siderail with Cardiac Chair and Gatch/Fowler (Right) 3006-400-644 (Optional) Head End Outer Siderail with Cardiac Chair, N/C and Gatch/Fowler (Left) 3006-400-633 (Optional) Return To Table of Contents 3006-109-101 REV A www.stryker.com...
  • Page 57 Footboard, with Bed Exit and Scale 3006-508-007 (Optional) Footboard, with Bed Exit and Zone Control 3006-508-006 (Optional) Footboard, with Bed Exit, Scale and Zone Control 3006-508-009 (Optional) Bed Exit 3006-508-109 (Optional) Return To Table of Contents www.stryker.com 3006-109-101 REV A...
  • Page 58 Note: All product labels are standard on the bed unless otherwise noted as being optional. Part Name/Number Product Label Bed Exit with Zone Control 3006-508-106 (Optional) Scale System 3006-508-107 (Optional) Awareness Status 3006-508-108 (Optional) Return To Table of Contents 3006-109-101 REV A www.stryker.com...
  • Page 59 WiFi CPU Cover CPU P/N 3006-300-105 3006-308-900 ONL Y Base Stars Label (3006-260-603) United We Stand Label (Left) (3006-360-604) United We Stand Label (Right) (3006-360-605) Serving Those Who Serve Label (3006-560-031) Return To Table of Contents www.stryker.com 3006-109-101 REV A...

  • Page 60: Cleaning

    Hand wash all surfaces of the bed with warm water and mild detergent. DRY THOROUGHLY. Do not steam clean or hose off the S3™ MedSurg Bed, Model 3002 Patriot™ Series. Do not immerse any part of the bed. Some of the internal parts of the bed are electric and may be damaged by exposure to water.

  • Page 61: Recycling Passport

    Recycling Passport Assembly Part number: 3006-343-895 (Reference Only) Item Recycling/Material Code Important Information (3006-308-900) CPU Board (0059-157-000) Power Supply Return To Table of Contents www.stryker.com 3006-109-101 REV A...
  • Page 62 Recycling Passport Assembly Part number: 3006-303-010 (Reference Only) Item Recycling/Material Code Important Information (3006-303-900) 37-Pin Plugover Board Return To Table of Contents 3006-109-101 REV A www.stryker.com...
  • Page 63 Recycling Passport Assembly Part number: 3006-400-125 (Reference Only) Assembly Part number: 3006-400-225 (Reference Only) Item Recycling/Material Code Important Information (3006-400-910) Siderail Outer PCB, Left (3006-400-910) Siderail Outer PCB, Right Return To Table of Contents www.stryker.com 3006-109-101 REV A...
  • Page 64 Recycling Passport Assembly Part number: 3006-400-130 (Reference Only) Assembly Part number: 3006-400-230 (Reference Only) Item Recycling/Material Code Important Information (3006-400-930) Siderail Outer PCB, Left (3006-400-930) Siderail Outer PCB, Right Return To Table of Contents 3006-109-101 REV A www.stryker.com...
  • Page 65 Recycling Passport Assembly Part number: 3006-303-045 (Reference Only) HEAD END, Patient Left Side Item Recycling/Material Code Important Information (3006-303-871) Battery 9V Return To Table of Contents www.stryker.com 3006-109-101 REV A...
  • Page 66 Recycling Passport Assembly Part number: 3001-314-012 (Reference Only) Item Recycling/Material Code Important Information (3001-314-920) Pendant Port PCB Return To Table of Contents 3006-109-101 REV A www.stryker.com...
  • Page 67 Recycling Passport Assembly Part number: 3006-501-011 (Reference Only) Item Recycling/Material Code Important Information (3006-501-900) Footboard PCB Return To Table of Contents www.stryker.com 3006-109-101 REV A...
  • Page 68 Recycling Passport Assembly Part number: 5212-300-053 (Reference Only) Item Recycling/Material Code Important Information (5212-300-930) IR Module PCB Assembly Return To Table of Contents 3006-109-101 REV A www.stryker.com...
  • Page 69 Recycling Passport Assembly Part number: 5212-300-012 (Reference Only) Item Recycling/Material Code Important Information (5212-300-910) Wireless Module PCB Assembly Return To Table of Contents www.stryker.com 3006-109-101 REV A...

  • Page 70: Emc Information

    The S3™ MedSurg Bed, Model 3002 Patriot™ Series is suitable for use in the electromagnetic environment specified below. The customer or the user of the S3™ MedSurg Bed, Model 3002 Patriot™ Series should assure that it is used in such an environment.
  • Page 71 S3™ MedSurg Bed, Model 3002 Patriot™ Series. The S3™ MedSurg Bed, Model 3002 Patriot™ Series is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the S3™ MedSurg Bed, Model 3002 Patriot™...
  • Page 72 The S3™ MedSurg Bed, Model 3002 Patriot™ Series is suited for use in the electromagnetic environment specified below. The customer or the user of the S3™ MedSurg Bed, Model 3002 Patriot™ Series should assure that it is used in such an environment.
  • Page 73 The S3™ MedSurg Bed, Model 3002 Patriot™ Series is intended for use in an electromagnetic environment specified below. The customer or the user of the S3™ MedSurg Bed, Model 3002 Patriot™ Series should assure that it is used in such an environment.

  • Page 74: Warranty

    Stryker Medical Division, a division of Stryker Corporation, warrants to the original purchaser the S3™ MedSurg Bed, Model 3002 Patriot™ Series to be free from defects in material and workmanship for a period of one (1) year after date of delivery. Stryker’s obligation under this warranty is expressly limited to supplying replacement parts and labor for, or replacing, at its option, any product which is, in the sole discretion of Stryker, found to be defective.

  • Page 75: Service Contract Programs

    Stryker authorized parts used Service during regular business hours (8−5) * Does not include maintenance due to abuse or for any disposable items. Stryker reserves the right to change options without notice. Stryker Medical also Offers personalized service contracts. Pricing is determined by age, location, model and condition of product.
  • Page 78 UNITED STATES Stryker Medical 3800 E. Centre Ave., Portage, Michigan USA 49002 European Representative Stryker France ZAC Satolas Green Pusignan Av. De Satolas Green 69881 MEYZIEU Cedex France 2011/03 3006-109-101 REV A www.stryker.com...

This manual is also suitable for:

S3 medsurg bedMedsurg bed s3

Table of Contents