Silvercrest SAB 160 B2 Operating Instructions Manual page 33

Rejecting a call
♦ Reject an incoming call by pressing the
Redial
♦ Press and hold the TALK button
2 seconds.
–
Caller lists
♦ Press the SEL button
display
♦ Press the BD/ENT button
♦ Turn the multi-controller
–
–
* Only the incoming and outgoing calls carried out directly from the car stereo
will be displayed.
Press the BD/ENT button on the device again. READING appears on the
♦
display and then the most recent incoming (IN CALL) or or dialled (OUT CALL)
call numbers are shown.
♦ Turn the multi-controller to show the last 20 received and/or dialled call
numbers one after the other.
♦ Press the
♦ Press the
Telephone book function
You can transfer up to 20 contacts (telephone book entries) from the connected
mobile phone to the device and thus dial and call these contacts from the device.
NOTE
► See your mobile phone operating instructions for details on transferring
contacts via Bluetooth
Each transferred contact is fi led in memory slot PB 01. Any contacts that
►
have already been transferred are automatically pushed one memory slot
further (PB 02, etc).
Press the SEL button for approx. 2 seconds. CALL LIST appears on the display
♦
SAB 160 B2
The last number you called on the mobile telephone will be dialled.
for approx. 2 seconds. CALL LIST appears on the
16
.
6
15
3
IN CALL: shows the last 20 incoming calls*.
OUT CALL: shows the last 20 outgoing calls*.
button to dial the selected call number.
2
button to cancel redialling and exit the caller list.
.
®
button
on the microphone for around
35
on the device. IN CALL appears on the display.
to select between the following displays:
.
17
GB
IE
29