Silvercrest SAB 160 B2 Operating Instructions Manual page 20

GB
IE
16
♦ Turn the multi-controller
IN CALL: shows the last 20 incoming calls.
–
OUT CALL: shows the last 20 outgoing calls.
–
* Only the incoming and outgoing calls made directly from the car stereo will be
displayed.
♦ Press the BD/ENT button
and subsequently shows the last incoming (IN CALL) or dialled
display
6
(OUT CALL) call number.
♦ Turn the multi-controller to show the last 20 received and/or dialled call
numbers one after the other.
♦ Press the button
♦ Press the button
PH BOOK – telephone book function
You can transfer up to 20 contacts (telephone book entries) from the connected
mobile phone to the device and thus dial and call these contacts from the device.
NOTE
► See your mobile phone operating instructions for details on transferring
contacts via Bluetooth
Each transferred contact is fi led in memory slot PB 01. Any contacts that
►
have already been transferred are automatically pushed one memory slot
further (PB 02, etc).
♦ Press the SEL button
display
Turn the multi-controller to select the display PH BOOK.
♦
Press the BD/ENT button on the device. READING appears on the display.
♦
Subsequently, PB01 appears and the name and call number of the fi rst
memory slot is shown.
♦ Turn the multi-controller to select additional telephone book entries.
♦ Press the button to dial the selected call number.
♦ Press the button to end the call and exit the directory function.
DISP – display information
♦ Turn the multi-controller to display the following information successively:
radio station, time (automatically set with RDS reception), frequency and PTY set-
tings (these RDS functions are sent by broadcasting services in various volumes;
also refer to Section "Radio functions").
3 to select between the following displays:
on the device again. READING appears on the
15
to dial the selected call number.
2
to end redialling and exit the caller list.
17
.
®
for approx. two seconds. CALL LIST appears on the
16
SAB 160 B2