Table of Contents
Advertisement
Crestron CNX-ASBK
Operations & Installation Guide - DOC. 8143
Install the PCB Assembly
NOTE: DO NOT twist the cables during installation. The cables are custom
designed and will fit perfectly. If the cable does not fit correctly, switch the cable
ends from the PCB to the CNX-PAD8 processor PCB. DO NOT force the connector
onto pins.
12. Hold one end of the PCB to PCB cable (2-inch, 4-pin) toward the front
of the CNX-PAD8. Carefully align and insert the other connector onto
the connector on CNX-PAD8 processor PCB.
13. Curl the cable directly above and insert the other connector onto the
pins of the PCB as shown.
Install the PCB to PCB Cables
Audio Switcher Bussing Kit
10 COVER
PLATE SCREWS
Audio Switcher Bussing Kit: CNX-ASBK • 5
Advertisement
Table of Contents
