Crestron CNX-ASBK
Audio Switcher Bussing Kit:
CNX-ASBK
Description
Operations & Installation Guide - DOC. 8143
Functional Description
The Audio Switcher Bussing Kit, CNX-ASBK, is used to daisy-chain CNX-PAD8s
to expand the number of room outputs. Each CNX-PAD8 controls up to eight audio
sources and distributes the audio to up to eight room amplifiers (not supplied). A
maximum of four CNX-PAD8s may be daisy-chained together to provide up to 32
room outputs. The CNX-ASBK provides for the additional outputs by bussing up to
eight inputs while preventing extreme impedance loading. One kit is needed for each
CNX-PAD8 that is to be daisy-chained.
Physical Description
Each CNX-ASBK consists of one Point Cross Loop Printed Circuit Board (PCB)
Assembly, eight 4-conductor Cross Point PCB to Processor PCB Cable Assemblies,
and four 12-conductor Bussing Cable Assemblies. Refer to the physical views shown
after this paragraph.
PCB Assembly (Front and Rear View)
4-PIN CONNECTORS
12-PIN CONNECTORS
Audio Switcher Bussing Kit
8.59"
PCB MOUNTED STAND-OFFS
Audio Switcher Bussing Kit: CNX-ASBK • 1
1.48"
(FRONT VIEW)
(REAR VIEW)