Table of Contents
Advertisement
Quick Links
5100 DOOR CLOSER MODELS
TOP JAMB INSTALLATION - PUSH SIDE - PIVOT STOP (PS) ARM APPLICATIONS
Opening
Dim. A
Dim. B
85°
10-9/16" [268.3] 16-1/16" [408]
90°
9-15/16" [252.4] 15-7/16" [392.1]
95°
9-3/8" [238.1]
14-7/8" [377.8]
100°
8-7/8" [225.4]
14-3/8" [365.1]
105°
8-7/16" [214.3] 13-15/16" [354]
110°
8-1/16" [204.8] 13-9/16" [344.5]
NOTES:
1. DO NOT SCALE DRAWING. LEFT HAND DOOR SHOWN.
2. DIMENSIONS ARE GIVEN IN INCHES [MM].
3. FOR DOORS WITH REVEAL OF 4 INCHES. CONSULT FACTORY FOR OTHER REVEAL DEPTHS.
4. MINIMUM CEILING CLEARANCE FROM BOTTOM OF FRAME FACE FOR CLOSER : 2-13/16".
5. SEX NUTS REQUIRED FOR UNREINFORCED OR COMPOSITE FIRE DOORS.
6. DOOR AND FRAME MUST BE REINFORCED PER ANSI/SDI A250.8 REQUIREMENTS - MINIMUM THICKNESS
RECOMMENDED FOR REINFORCEMENTS IN HOLLOW-METAL DOORS AND FRAMES: 0.067" UNLESS OTHERWISE NOTED.
7. HOLLOW-METAL DOORS REQUIRE CHANNEL OR BOX-TYPE REINFORCEMENT WHEN SEX NUT MOUNT IS SPECIFIED.
BOTTOM OF FRAME FACE
A
C L
HINGE
OR
PIVOT
11 1/8" [282.6]
B
1 3/4" [44.5]
MACHINE SCREWS:
USE #7 OR 13/64" [5.1] DRILL AND 1/4-20 TAP
WOOD DOOR/FRAME SCREWS:
USE 5/32" [4] DRILL
SEX NUTS:
USE 3/8" [9.5] DRILL (CLOSER TO DOOR)
INSTRUCTION: 519356
REV.0
10-01-19
PDQ Manufacturing
2230 Embassy Dr.
Lancaster, PA 17603
833-273-7832
833-2 PDQTECH
www.pdqlocks.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PDQ 5100
Summary of Contents for PDQ 5100
- Page 1 5100 DOOR CLOSER MODELS INSTRUCTION: 519356 REV.0 10-01-19 TOP JAMB INSTALLATION - PUSH SIDE - PIVOT STOP (PS) ARM APPLICATIONS Opening Dim. A Dim. B 85° 10-9/16" [268.3] 16-1/16" [408] 90° 9-15/16" [252.4] 15-7/16" [392.1] 95° 9-3/8" [238.1] 14-7/8" [377.8] 100°...
- Page 2 Counter-clockwise (CCW) turns decrease spring power (-). 3. Phillips screw driver FASTER #7 or 13/64" drill bit and INCREASE 5100 Series closers can be adjusted to meet LATCH 1/4-20 tap (metal screws) DECREASE ADA Barrier Free (BF) applications. Compliance with ADA/BF SPEED 5.
Need help?
Do you have a question about the 5100 and is the answer not in the manual?
Questions and answers