Transport Lock - IBEX TS51C Assembly And Quick Start Manual

Ibex TS51C Drum Mower Assembly Guide Copyright 2020 Ibex Equipment Co.
Figure 25 holes are close to being aligned
Put the washer and nut on the pivot pin, but do not over-tighten.
Figure 26 nut and washer installed on pivot pin

Transport Lock

Install the transport lock for the spring arm as shown. Use a mallet to drive the rubber grip over the pin as
shown. There are 2 rubber grips, use the smaller of the two.
Figure 27 transport lock and rubber grip installation
Page | 13