IBEX TS51C Assembly And Quick Start Manual page 20

Ibex TS51C Drum Mower Assembly Guide Copyright 2020 Ibex Equipment Co.
Figure 42 align end of tube to end of shaft
Use the other end of the tube to mark the cut length on the steel shaft.
Figure 43 use tube to mark the cut length to steel shaft
Now the shaft is marked to cut the same length as the plastic tube.
Figure 44 shaft is marked to cut off same length as plastic tube
Cut the shaft using a metal cutting blade such as a hack saw, band saw, or similar. When cutting the steel shaft,
clamp it in a vise using the discard end to clamp on. Be sure to wear eye protection.
Figure 45 clamp on the part of the shaft that is being cut off, then cut
Page | 20