ASSEMBLY GUIDE
Figure 25 nut and washer installed on pivot pin
TRANSPORT LOCK
Install the transport lock for the spring arm as shown. Use a mallet to drive the rubber grip
over the pin as shown. There are two rubber grips. Use the smaller of the two. The rubber grip
may already come installed.
Figure 26 transport lock and rubber grip installation
PTO SHAFTS
Your mower comes with two different PTO shafts, one with a slip clutch and one with a one-
way clutch. It's important to install them in the correct location, and in the correct direction.
2022-1.0 IBEX EQUIPMENT CO.
15