IBEX TS51C Assembly And Quick Start Manual page 10

Ibex TS51C Drum Mower Assembly Guide Copyright 2020 Ibex Equipment Co.
Figure 16 swivel tee in place for next step
Next get the shorter of the two swivel pins as seen in Figure 17. It usually has the washer and nut attached.
Figure 17 short swivel pin
Align the two holes on the support arm so that they centered to the bushing. The pin will not go through and the
plastic bushings could be damaged if the holes are not well aligned first. You can use an adjustable height stand
such as a chair to hold up the arm while aligning the holes. Take note of the orientation of features so that it is
installed right side up.
Figure 18 align holes in arm to swivel tee
Page | 10