Table of Contents
Advertisement
ASSEMBLY GUIDE
Transport lock
The mower comes with a plate ("transport lock") that pivots and is meant to lock in place while the mower is in
transport position. During mowing, the transport lock should always be released. Install the transport lock
using the hardware shown in Figure 29. Figure 30 shows the transport lock in place.
Figure 29 hardware for spring arm transport lock
Figure 30 spring arm transport lock shown installed and in transport position
Drum unit pivot lock and restrictor plate.
The function of this part is to allow the drum section to pivot on the support arm within a controlled range. The
angle of pivot is kept in a safe range to keep the driveline from exceeding its working angle range and length.
During transport the mower is swung back and locked into place. This plate with the nut and handle shown in
Figure 32 is tightened so that the drum mower does not freely pivot while driving down the road. It is released 2
turns for mowing.
2022-01.0 IBEX EQUIPMENT CO.
16
Advertisement
Table of Contents
