Ilt Shade Controller: C2N-Ssc-2; Introduction; Features And Functions - Crestron C2N-SSC-2 Operations & Installation Manual

Crestron C2N-SSC-2
ILT Shade Controller:
C2N-SSC-2

Introduction

Features and Functions

The Crestron
to two Somfy ILT Intelligent Shade Motors via a serial interface. In a
Crestron control system network (Cresnet
called Shade Controller) sets the position and the direction of motion of
each shade individually, with programmable settings for the upper and
lower limits of travel for each shade. Commands to move to a specific
location will position the shades relative to the full range of travel
between these upper and lower limits. Subsequent commands to move a
shade in the open or close direction activate shade movement until a limit
of travel is reached, until the command is de-activated, or until a stop
command is sent.
The Shade Controller can store and recall up to 20 shade presets.
Functional Summary
• Control up to two shades per Shade Controller
• Control position and direction of each shade individually
• Store and recall up to 20 presets per shade
• Connect via one 4-pin RJ-11 interface connector per shade
• Control shades in multi-unit installations individually, in
Operations & Installation Guide - DOC. 6318
®
ILT Shade Controller, C2N-SSC-2, communicates with up
groups, all together, or any desired combination.
ILT Shade Controller
®
), the C2N-SSC-2 (herein
ILT Shade Controller: C2N-SSC-2 •
1