Dräger Oxylog 3000 plus Supplement To The Instructions For Use page 2

English
Supplement to the instructions for use Oxylog 3000 plus en English
Supplement to the instructions for use
WARNING
To properly use this medical device, read and comply with
the instructions for use and this supplement.
Instructions for use Part number
Oxylog 3000 plus en 5705305
Oxylog 3000 plus zh 5705324
Oxylog 3000 plus es 5705309
Oxylog 3000 plus ptBR 9052937
 Keep this supplement with the instructions for use of the med-
ical device.
This supplement completes the information in the instructions for
use in the following chapters:
For Your Safety and that of Your Patients
Installing accessories
WARNING
Risk of incorrect operation and of incorrect use
Follow the instructions for use of all accessories carefully.
Abbreviations
Abbreviation Explanation
IP34 Level 3 protection against foreign bodies
and contact,
Level 4 protection against ingress of
liquids
Assembly
Connecting the disposable breathing circuit for pediatric
patients
WARNING
Risk of patient injury
If the tidal volume is less than 250 mL, use a pediatric
breathing circuit.
If the tidal volume is more than 250 mL, use an adult breath-
ing circuit.
2
Preparation
Zero calibration before ventilation
WARNING
Edition
Risk of patient injury
12 – 2020-01
The CO
of patient injury.
17 – 2020-11
– Before the CO
11 – 2020-01
CO
09 – 2020-01
– Do not breathe on the CO
calibration and the CO
– Only perform the CO
check at ambient temperatures between 10 and 40 °C
(50 and 104 °F).
– Do not perform the CO
to direct sunlight.
Monitoring
Performing zero calibration during ventilation
WARNING
Risk of patient injury
The CO
of patient injury.
– Before the CO
CO
– Do not breathe on the CO
calibration and the CO
– Only perform the CO
check at ambient temperatures between 10 and 40 °C
(50 and 104 °F).
– Do not perform the CO
to direct sunlight.
Configuration
Performing zero calibration
WARNING
Risk of patient injury
The CO
of patient injury.
– Before the CO
CO
– Do not breathe on the CO
calibration and the CO
– Only perform the CO
check at ambient temperatures between 10 and 40 °C
(50 and 104 °F).
– Do not perform the CO
to direct sunlight.
measurement can be inaccurate and lead to a risk
2
filter check can be performed, perform a
2
zero calibration.
2
sensor during the CO
2
filter check.
2
zero calibration and the CO
2
zero calibration when exposed
2
measurement can be inaccurate and lead to a risk
2
filter check can be performed, perform a
2
zero calibration.
2
sensor during the CO
2
filter check.
2
zero calibration and the CO
2
zero calibration when exposed
2
measurement can be inaccurate and lead to a risk
2
filter check can be performed, perform a
2
zero calibration.
2
sensor during the CO
2
filter check.
2
zero calibration and the CO
2
zero calibration when exposed
2
Supplement to the instructions for use Oxylog 3000 plus
zero
2
filter
2
zero
2
filter
2
zero
2
filter
2