Patient List Columns - GE Definium AMX 700 Operator's Manual

Patient List Columns

Table A3-2 describes the columns on the Worklist. This information comes from what has been entered
in the Patient Information screen. Refer to
presented.
Table A3-2 Worklist columns
Column
Date The date the procedure is scheduled to occur. On locally added procedures, the
current date is the default.
Patient The full name of the patient as entered in Add Patient/Patient Information screen.
Patient ID The patient's medical record number or any number that distinguishes the patient.
Accession # The exam's accession number.
Description The procedure ordered for the accession number. (This is the content of the
Procedure Description field on the Add Information screen.)
Physician The name of the physician or technician who performed the exam. (This is the
content of the Performing Physician field on the Add Information screen.)
Modality The modality of the procedure.
Status The status of the procedure.
Available options are:
• Scheduled – procedure has been created but not started.
• Completed – procedure has been closed.
• Suspended – procedure was started then interrupted.
• Discontinued – procedure was opened but cannot be completed.
Refer to
about Completed, Suspended, and Discontinued exams.
Location For mobile units, the location of the patient within the facility.
Definium AMX 700 X-Ray System
Operator Manual
Overview (p. A3-15) for detailed descriptions of the information
Chapter A4: Image Acquisition-End Exam
5161515-1EN Rev. 6 (10 February 2008)
© 2008 General Electric Company. All rights reserved.
Description
(p. A4-13) for more information
Chapter A3: Worklist
A3-6