Table of Contents
Advertisement
Delete Image Annotations
Follow this process to remove image annotations.
NOTE: It is not possible to recover deleted annotations.
1. Select the annotation.
2. Press [ERASE] or [ERASE ALL].
If [ERASE ALL] was pressed, a message appears: "Would you like to remove all annotations from
the selected image?"
3. Press [YES].
All annotations are removed.
Adjust Image Shutter (Crop Image)
The system has the ability to detect the collimated edges of the image and may apply shutters to mask
the collimated areas. Refer to
The Manual Shutter function allows you adjust the automatically applied (default) shutter for viewing and
printing.
You can only adjust the shutter of images in an active exam or of re-processed images.
NOTE: To view hidden areas of the image, use the Manual Shutter and drag the red corner handles to the
edges of the image.
Follow this process to adjust the shutter of an image.
1. Select the image.
Figure A5-9 Image before adjusting shutter
2. Click [MANUAL SHUTTER].
The image will be shown in reduced size so that you are able to see the edges (Figure A5-10).
The shutter appears as a yellow box with red handles (Figure A5-11). Anything outside of the box
will be blacked out when the shutter is applied.
Definium AMX 700 X-Ray System
Operator Manual
Automatic Shutter
(p. A5-16) for more information.
5161515-1EN
Rev. 6 (10 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter A5: Image Viewer
A5-15
Advertisement
Table of Contents
