Table of Contents
Advertisement
Tool
Cobb
User
Annotation
RL Marker
Definium AMX 700 X-Ray System
Operator Manual
Select the Cobb.
• To move: Press and drag the middle of a line.
• To change the angle: Press and drag one of the square handles
at the ends of the line.
• To resize: Press and drag one of the square handles at the ends
of the line.
Select User Annotation from the Image Tools palette.
Select an annotation from the list or click in the "CUSTOM" text
area of the Text Annotation screen.
Type your comment.
Press [OK].
• To move: Press and drag by the red square on the top left corner
of the text box.
• To edit: Double-tap (two touches in quick succession) the User
Annotation. Make your changes on the Text Annotation screen.
Refer to
Chapter A7: Set Preferences-Preset Names
more information about configuring the pre-set annotation list.
Select the RL marker.
• To move: Select the marker and drag to the desired area.
• To switch between R and L: Press the RL button.
NOTE: Only one RL marker is inserted per image.
5161515-1EN
Rev. 6 (10 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter A5: Image Viewer
Instructions
(p. A7-15) for
A5-14
Advertisement
Table of Contents
