GE Definium AMX 700 Operator's Manual page 90

Function
[EMERGENCY EXAM]
[CASSETTE EXAM]
network connection status
wireless network connection
status
system status
[MESSAGE LOG]
[QAP]
[EXPOSE HOLD]
Definium AMX 700 X-Ray System
Operator Manual
Begins an exam without selecting a procedure from the Patient
List or adding the patient. The system will assign a unique
tracking number as the Patient Name.
Refer to Chapter A4: Image Acquisition-Conduct an Emergency
Exam (p. A4-12) for more information.
The tracking number is the date and time the exam was initiated.
The time is recorded to the second.
Begins a cassette exam. Cassette exams allow exposures to be
taken without any digital patient record or image storage.
Refer to Chapter A4: Image Acquisition-Conduct a Cassette Exam
(p. A4-10) for more information.
Appears when the Definium AMX 700 is connected to the hospital
network.
If the wireless network connection is enabled, displays the status
of the connection and signal strength. Refer to
General Information-Wireless Network Connection
more information.
Displays the last system status message.
To clear the system status area, open the Message Log and close
it again.
Refer to Chapter A2: General Information-System Status and
Messages (p. A2-10) for more information.
Brings up the message log since the last system re-start.
Refer to Chapter A2: General Information-System Status and
Messages (p. A2-10) for more information.
Brings up the screens that allow you to perform QAP.
Refer to Chapter A8: Quality Assurance Process and Maintenance
for more information.
Appears when there is some condition that prevents an x-ray
from being taken.
Press the button to view a list of all errors and interlocks that are
preventing the exposure. The items are removed from the list as
they are corrected. The button disappears when all errors and
interlocks are corrected.
5161515-1EN Rev. 6 (10 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter A3: Worklist
Description
Chapter A2:
(p. A2-7) for
A3-5