GE Definium AMX 700 Operator's Manual page 13

Rev
Date
# Affected
3 (continued) 8-2
A2-2
A2-4
A2-8
A2-8
A6-12
A6-13
A7-1
A7-14 -- 15
A7-26
A7-31
A7-32
A7-33 -- 40
A7-44
A7-50
B-13
4 29 Sep. 2006 All
3-4
4-4
4-7
7-1
A1-1 -- 13
A1-2
A1-3
A1-4
A1-5
A1-6
Definium AMX 700 X-Ray System
Operator Manual
Pages
Changed row in table 8-1, "SLOW CHARGING" to "STANDBY" and updated
description of message.
Replaced figure A2-1.
Added cross-references to "Software Reset" section.
Added new procedure for switching between wired and wireless connections.
Added note that software reset does not require shut down or reset.
Removed that CD-RW disks may be used to copy exams, added note that the
system cannot write to CD-RW disks.
Added new step 8 to confirm that images have been written to the CD.
Re-wrote chapter introduction.
Added notes in table A7-6, in the "Plus Previous" and "Plus Future" rows.
Changed text in table A7-9, clarified what happens to images without the Auto
Tag mark upon auto delete.
Added new descriptions of DEI displays to the options listed after step 2.
Changed description of Technical Mode.
Re ordered the Image Processing sections, updated information to match current
system.
Removed that CD-RW disks may be used to copy protocol database, added note
that the system cannot write to CD-RW disks.
Removed "Unpaired" as an option for Laterality.
Changed text in table B-1, row Inactivity Timeout. Added that this function is not
implemented and that changing the settings may cause conflicts with system
software. Removed most of the description.
Miscellaneous typographical and grammatical corrections.
Deleted information from table 3-1, row 15, regarding opening and closing the
detector bin. Unit design has changed so that it is always open.
Deleted information from step 3 regarding closing the detector bin.
Inserted note regarding that the tether should be removed from the column
holder before rotating the column.
Added cross-reference to Chapter A1: Detector Overview-Handling and Cleaning.
Re-ordered chapter to better suit end-user needs.
Corrected information in "Detector Functions" section.
Corrected information in "Panel" section.
Corrected information in "Electronics" section.
Corrected information in "Physical Appearance / Finish" section.
Corrected information in "Nameplates and Markings" section.
Corrected information in "Detector Alignment" section.
Updated information in table A1-1.
Added section on "Electro-magnetic Interference".
5161515-1EN
© 2008 General Electric Company. All rights reserved.
Reason for Change
Rev. 6 (10 February 2008)
Revision History
v