Table of Contents
Advertisement
Table A7-9 Auto Delete functions
Function
Auto Delete
[ON] [OFF]
Auto Delete images when
database is __% full.
Delete images until
database is __% full.
Images must be at least
__ Days old before
deletion.
Images must meet __ of
the checked options
before deletion.
Processed image printed
Processed image sent
Processed image
committed
Allow Non-Quality
Checked (tagged) images
to be deleted regardless
of being sent, committed
or printed.
[SAVE]
[CANCEL]
Definium AMX 700 X-Ray System
Operator Manual
Turns Auto Delete on or off.
Specifies when to auto delete images based on database size.
Specifies how many images to delete based on database size.
Specifies how old (in days) an image must be for it to be deleted. Images
that are less than the entered number will not be deleted.
Allows you to constrain the deletion of raw and processed images
based upon checkbox selection (see below).
Available options are:
• All
• Any
• None
Selecting the Print parameter allows auto deletion of images that have
been printed.
Allows auto deletion of processed images with no errors that have been
sent to another viewing station.
Allows auto deletion of processed images that have been sent to a long
term device with storage commitment capability.
Storage commitment for a network host is configured from the System
– System screen, Network Connections.
Allows auto deletion of any images that do not have the Auto Tag
(Quality Check) mark.
NOTE: If any of the images in the series have the Auto Tag (Quality Check)
mark, the series will not auto delete.
Saves your changes and closes the screen.
Closes the screen without saving changes.
5161515-1EN
Rev. 6 (10 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter A7: Set Preferences
Description
A7-24
Advertisement
Table of Contents
