Working With Groups; Add Groups - GE Definium AMX 700 Operator's Manual

Working with Groups

The Group and Permissions Mapping tab (Figure B-2) allows you to add groups, remove groups, and
assign privileges to groups. On this screen, the four privileges categories are at the top of the screen
(columns) and the group names are at the left edge of the screen (rows).
Figure B-2 Group and Permissions Mapping tab

Add Groups

1. Select the Group and Permissions Mapping tab, if necessary.
2. Click [ADD GROUP].
3. Type a name for the group in the text box that appears near the bottom of the screen (Figure B-3).
Figure B-3 Add group text box
Definium AMX 700 X-Ray System
Operator Manual
5161515-1EN Rev. 6 (10 February 2008)
© 2008 General Electric Company. All rights reserved.
Appendix B: Login Administration
B-4