Photographic illustrations may also differ and must not be seen as guaranteed properties. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 4 / 27 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
Pay attention to the depth of the mounting holes in the motion platform (p. 22). Only use screws of the correct length for the respective mounting holes. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 7 / 27 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
The P-736.ZRx features a protective earth connector (p. 9) which is marked with the symbol for the protective earth conductor Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 11 / 27 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
Page 12
4. Make sure that the contact resistance at all connection points relevant for connecting the protective earth conductor is <0.1 Ω at 25 A. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 12 / 27 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
3. Tighten the mounting screws with a torque between 0.8 Nm and 1.1 Nm. 4. Check that the P-736.ZRx is affixed firmly to the surface. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 13 / 27 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
Mounting the P-736.ZRx onto an M-545 stage Mount the P-736.ZRx onto the M-545 stage as depicted in the figure. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 14 / 27 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
Mounting the P-736.ZRx onto a U-761 stage Mount the P-736.ZRx onto the U-761 stage as depicted in the figure. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 15 / 27 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
3. Mount the holder with the M2 screws to the provided M2 threaded holes (see Figure 7 above). Pay attention to the specified torque range (p. 23) while doing so. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 16 / 27 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
Clean the surface of the P-736.ZRx with a cloth that is dampened with a mild cleanser or disinfectant (e.g., alcohol or isopropyl alcohol). Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 18 / 27 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
Page 19
P736T0002, applies to P-736.ZRxS PInano® Piezo Scanner Systems CBo, 2021-09-20 Customer Service For inquiries and orders, contact your PI sales engineer or send us an email (service@pi.de). If you have any questions concerning your system, provide the following information: −...
PI piezo nanopositioning systems are free of friction. All specifications based on room temperature (22 °C ±3 °C). Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 20 / 27 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
Dispose of your old equipment according to international, national, and local rules and regulations. In order to fulfil its responsibility as the product manufacturer, Physik Instrumente (PI) GmbH & Co. KG undertakes environmentally correct disposal of all old PI equipment made available on the market after 13 August 2005 without charge.
Need help?
Do you have a question about the PInano P-736.ZRxS and is the answer not in the manual?
Questions and answers