Glossary - Lenze 9300 Operating Instructions Manual

Show/Hide Bookmarks
10.5
Term
CE
Code
Fieldbus
GDC
RFG
INTERBUS
Select target position
LECOM
LU
OU
PC
PM
QSP
Ctrl. enable
Ctrl. inhibit
Contouring error
Contouring error tolerance
Contouring error monitoring

Glossary

Meaning
Communauté Européenne (English: European Community)
For entry and display (access) of parameter values.
Variable addressing according to the format "code/subcode" (Cxxxx/xx).
All variables can be addressed via the code digits.
For data exchange between superimposed control and positioning control, e.g. InterBus-S or PROFIBUS DP
Global Drive Control (PC-program (Windows) for Lenze controllers)
Ramp function generator
Industrial communication standard to DIN E19258
The target which is to be approached by means of a defined traversing profile.
Lenze Communication
Undervoltage
Overvoltage
Personal Computer
Permanent magnet
Quick stop
Controller enable
Controller inhibit ( = Controller enable )
Deviation between momentary position setpoint and actual position. Display for a momentary following error under C0908.
If the contouring error reaches a defined contouring error tolerance, a fault indication is released.
Monitors the momentary following error if the contouring error tolerance is exceeded and releases a fault indication, if necessary.
BA9300POS EN 2.3
Appendix
10-73