Ferno Germa Rescue Lite Full Body Splint Directions For Use Manual page 7

Germa Rescue Lite Full Body Splint
pressure should be created in the tubing and should be felt
at your fingertip.
If the pump does not function do not try to repair it, return it
for service to your local dealer or to a Germa service centre.
8. Storage
After each use, check to ensure that the full body splint is
still operating correctly and made ready for its next use.
Open the valve by turning it fully clockwise to fully close
then ½-1 turn anti-clockwise to open and put the splint
onto an even surface. Make sure the granules have been
distributed evenly, close the valve by turning clockvise and
then fold the mattress in its initial position.
The vacuum splint can be stored on top of the stretcher, or
folded in the storage bag, such that it will fit in the designated
storage area.
9. Specifications
The Rescue Lite Full Body Splint is in conformity with
Council Directive 93/42/EEC concerning Medical Devices
MR Safe.
Dimensions
Length x Width x Height
Weight
Heat resistance
Cold resistance
Capacity for foot pump
The pump has capacity to empty the mattress according to
EN 1865.
Materials
Part
Top and bottom material
Extra reinforcement
material
Innerbag
Wood
© Ferno Srl Rescue Lite Full Body Splint - Rel. 300420
see product information
below
see product information
below
70°
-30°
Material
Polyester fibres PVC coated
(flame resistant)
Polyester fibres PVC coated
(flame resistant)
Polyester
Birch
Product
Cat. no Product name
271 513 000
Germa Rescue Lite Full Body Splint
271 513 001 Germa Rescue Lite Full Body Splint Ready2go
Length x Width x Height, Weight
200 x 131/85 x 4 cm, 6 kg
Accessories
271 000 701 Foot pump
Spare parts
126 338 000 00 Valve for mattress
150 000 001 12 Repair kit
7