Intellectual property declaration 40066 - Pieve di Cento (BO) - ITALY Telephone (toll-free in Italy) 800.501.711 The information in this manual is the property of Ferno s.r.l. - Via Phone +39 0516860028 Benedetto Zallone 26, 40066 Pieve di Cento (Bologna) Italy. All...
The danger symbols draw attention to potentially dangerous situations that, if disregarded, may result in accidents, damage and/or injury. 1.4 Compatibility The B-lock head immobiliser system can be used also on other spinal supports such as: WARNING Millennia Spinal Board and the entire Najo series.
3.1 Description and intended use HEAD IMMOBILISER COMPONENTS Head immobiliser base (1) ● The B-lock head immobiliser (more simply referred to as Side blocks (2) ● “head immobiliser” in this manual) is a device designed to Forehead strap and chin guard (2) immobilise the patient's head and neck.
In any case, always observe local healthcare ● instructions and regulations. Important When not in use, store the B-lock head immobiliser indoors, in a dry location protected from direct sunlight Read the user At least two and in the storage configuration (Storage, page 12).
Page 9
B-lock head immobiliser Use of the Head immobiliser 5. Apply the “H”-shaped Velcro strap securing the B-lock head immobiliser to the atraumatic stretcher (Figure 7-8). Figure 7 - “H”-shaped Velcro strap application Figure 8 - Head immobiliser correctly applied with “H”-shaped Velcro strap...
Important • During disinfection, ensure there are no signs of wear When not in use, store the B-lock head immobiliser and/or damage. indoors, in a dry location protected from direct sunlight • Dry with a cloth. Ensure all the components of the and in the storage configuration (Storage, page 12).
EN 1865. Make sure they keep their holding properties and work correctly. Ferno s.r.l. shall not be liable for any damage to users or third parties due to improper use of the B-lock head immobiliser. CHECK-LIST FOR INSPECTION...
Website www.ferno.it WARNING For information on the use of the B-lock head immobiliser Unauthorised modifications of the B-lock head and to schedule training courses on the correct use of the immobiliser could cause serious damage, injury device, contact the Ferno s.r.l. Customer Service.
The warranty is rendered null and void in the case of: - failure to observe the operating instructions, Ferno's products are guaranteed against manufacturing defects for a period of 24 months from the date on the Ferno - misuse, s.r.l. shipping document.
8.4 Complaints Any complaints must be communicated to the reseller, or to Ferno s.r.l.'s Customer Service, within 5 days of receipt of the product or of discovery of the alleged defect. Claims or disputes regarding a single product shall not...