Step 4:
Step 5
Assembling the upper body frame
1.
Mount the connector frame (5) onto the upper frame (3) with one screw (68), two washers (63)
and one nut (60).
2.
Mount the two arm frames (8L/R) on the connector frame (5), each with one screw (39), two
washers (64) and one nut (61).
3.
Insert one adjusting pin (43) into each of the arm frames (8L/R).
4.
Slide one cushion (14) over each end of the arm frames (8L/R).
5.
Insert one cap into each end of the arm frames (8L/R).
6.
Fasten the grips (19) into the arm frames (8L/R), each with one screw (18), one screw (58) and
two washers (65).
16