Table of Contents
Advertisement
Step 7:
Assembling the cable - Part 3
1.
String the cable (22) through the pulley (32) and fasten it onto the leg press frame (7) with one
screw (49), two washers (64), two spacers (37) and one nut (61).
2.
String the cable (22) through the pulley (32) and fasten it onto the main frame (1) with one
screw (49), two washers (64), two spacers (37) and one nut (61).
3.
String the cable (22) through the pulley (32) and fasten it onto the pulley support (26) with one screw
(50), two washers (64), two spacers (37) and one nut (61).
4.
String the cable (22) though the pulley (32) and fasten it along with the pulley covers (31) onto the
base frame (2) with one screw (50), two washers (64) and one nut (61).
5.
String the cable (22) through the pulley (32) and fasten it along with pulley covers (31) onto the
pulley supports (28) with one screw (50), two washers (64) and one nut (61).
19
Advertisement
Table of Contents
