Related Manuals for Darwin Fitness DF-MS30
Summary of Contents for Darwin Fitness DF-MS30
- Page 1 Assembly and Operating Instructions max. 100 kg ~ 120 Min. 105 kg L 179 | B 116 | H 196 DFMS30.01.05 DF-MS30...
-
Page 3: Table Of Contents
Content GENERAL INFORMATION Technical Data Personal Safety Set-Up Place ASSEMBLY General Instructions Scope of Delivery Assembly STORAGE AND TRANSPORT General Instructions TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions Faults and Fault Diagnosis Maintenance and Inspection Calendar DISPOSAL RECOMMENDED ACCESSORIES ORDERING SPARE PARTS Serial Number and Model Name Parts List Exploded Drawing... - Page 5 Dear customer, Thank you for choosing Darwin fitness equipment. With Darwin fitness equipment we offer first- class home sports equipment at a great price point. Darwin exercise bikes and weight machines are easy to use, have a space-saving design and look really good. With our equipment we would like to support you in reaching your athletic goals, no matter if you want to lose weight or train for the national triathlon.
- Page 6 ABOUT THIS MANUAL Please carefully read the entire manual before installation and first use. The manual will help you to quickly set up the system and explains how to safely use it. Make sure that all persons exercising with the equipment (especially children and persons with physical, sensory, mental or motor disabilities) are informed about this manual and its contents in advance.
-
Page 7: General Information
GENERAL INFORMATION Technical Data Weight and dimensions: Article weight (gross, incl. packaging): No. 1 56kg No. 2 11.9kg No. 3 24kg No. 4 24kg Article weight (net, without packaging): 105.2kg Packaging dimensions (L x B x H): No. 1 approx. 187cm x 75cm x 19cm No. -
Page 8: Personal Safety
Personal Safety DANGER ⚠ Before you start using the equipment, you should consult your physician that this type of exercise is suitable for you from a health perspective. Particularly affected are persons who: have a hereditary disposition to high blood pressure or heart disease, are over the age of 45, smoke, have high cholesterol values, are overweight and/or have not exercised regularly in the past year. -
Page 9: Set-Up Place
Set-Up Place WARNING ⚠ Do not place the equipment in main corridors or escape routes. ⚠ CAUTION The training room should be well ventilated during training and not be exposed to any draughts. Choose the place in which to set up the equipment such that there is enough free space/ clearance to the front, the rear and to the sides of the equipment. -
Page 10: Assembly
ASSEMBLY General Instructions ⚠ DANGER Do not leave any tools, packaging materials such as foils or small parts lying around, as otherwise there is a danger of suffocation for children. Keep children away from the equipment during assembly. ⚠ WARNING Pay attention to the instructions attached to the equipment in order to reduce the risk of injuries. -
Page 11: Scope Of Delivery
Scope of Delivery The scope of delivery consist of the following parts. At the beginning, check whether all parts and tools belonging to the device are included in the scope of delivery and whether damage has occurred. In the event of complaints, the contractual partner must be contacted directly. CAUTION ⚠... -
Page 13: Assembly
Assembly Before assembly, take a close look at the individual assembly steps shown and carry out the assembly in the order given. NOTICE First loosely screw all parts together and check that they fit properly. Then tighten the bolts using the tool only when you are instructed to do so. Step 1: Assembly of the main frame and the weight block Assemble the main frame (1) onto the base frame (2) with two screws (48), four washers (64) - Page 14 Step 2: Assembling the upper frame and backrest Mount the upper frame (3) onto the main frame (1) with two screws (48), four washers (64) and two nuts (61). Mount the two upper weight block cover connectors (69) onto the upper frame (3), each with two screws (18) and two washers (65).
- Page 15 Step 2 Step 3: Mounting the leg press Mount the seat connector frame (6) onto the base frame (2) with two screws (48), four washers (64) and two nuts (61). Mount the seat frame (4) along with the connection plate (29) onto the main frame (1) with two screws (48), four washers (64) and two nuts (61).
- Page 16 Step 5 Step 4: Assembling the upper body frame Mount the connector frame (5) onto the upper frame (3) with one screw (68), two washers (63) and one nut (60). Mount the two arm frames (8L/R) on the connector frame (5), each with one screw (39), two washers (64) and one nut (61).
- Page 17 Step 5: Assembling the cable - Part 1 Fasten one end of the Cable (20) on the left arm frame (8L) with one screw (52), two washers (64) and one nut (61). String the cable (20) through the pulley (32) and fasten it along with the pulley covers (31) onto the left side of the pulley support (27) with one screw (51), two washers (64) and one nut (61) (see fig.
- Page 18 Step 7 Step 6: Assembling the cable - Part 2 String the cable (21) through the pulley (32) and fasten it onto upper frame (3) with one screw (50), two washers (64) and one nut (61). String the cable (21) through the pulley (32) and fasten it on the main frame (1) with one screw (49), two spacers (37), two washers (64) and one nut (61).
- Page 19 Step 7: Assembling the cable - Part 3 String the cable (22) through the pulley (32) and fasten it onto the leg press frame (7) with one screw (49), two washers (64), two spacers (37) and one nut (61). String the cable (22) through the pulley (32) and fasten it onto the main frame (1) with one screw (49), two washers (64), two spacers (37) and one nut (61).
- Page 20 Step 9 Step 8: Mounting the pull down bar and rowing attachment Fasten the pull down bar (10) with the carabine (40) onto the end of the cable (23). Fasten the rowing attachment (1) with the carabine onto the end of the cable (22).
- Page 21 Step 9: Attaching the covers Attach the weight block covers (35) onto the upper weight block cover connectors (69), each with four screws (59) and four washers (65). Attache the weight block covers (35) onto the lower weight block cover connectors (70), each with four screws (59) and four washers (65).
- Page 22 Step 10: Final checks Check that all cables have been correctly strung. Tighten all screw connections.
- Page 23 Step 11: Weight label stickers Put one sticker on one weight plate each according to the figure below (from top to bottom).
-
Page 24: Storage And Transport
STORAGE AND TRANSPORT General Instructions ࣑ ATTENTION Make sure that the equipment is protected from moisture, dust and dirt in the selected storage location. The storage location should be dry and well ventilated and have a constant ambient temperature between 5°C and 45°C. WARNING ⚠... -
Page 25: Troubleshooting, Care And Maintenance
TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions ⚠ WARNING Do not make any improper changes to the equipment. CAUTION ⚠ Damaged or worn components may affect your safety and the life of the equipment. Therefore, immediately replace damaged or worn components. In such a case, contact the contract partner. -
Page 26: Maintenance And Inspection Calendar
Maintenance and Inspection Calendar To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no solvents!) after each training session. The following routine tasks must be performed at the specified intervals: Part Weekly Monthly Quarterly Half-yearly Yearly Cables and pulleys... -
Page 27: Recommended Accessories
RECOMMENDED ACCESSORIES To make your training experience even more efficient and pleasant, we recommend that you add suiting accessories to your fitness equipment. This could be a floor mat, for example, which makes your fitness equipment stand more securely and also protects the floor from falling sweat, but it could also be additional handrails on some treadmills or silicone spray to keep moving parts in good shape. -
Page 28: Ordering Spare Parts
It's located on a white sticker. The exact position of this sticker is shown in the following illustration. Enter the serial number in the appropriate field. Serial number: Brand / Category: Darwin / multi-gym Model Name: MS30 Article Number: DF-MS30... -
Page 29: Parts List
Parts List Name Qty. Name Name Qty. Qty. Main frame Pulley Base frame Knob nut Oblique beam combination Plastic weight stack Seat combination Steel net Hanger combination Alloy sleeve Support frame combination Spacer Leg frame Alloy sleeve 8L/R Swing arm combination 1 pr Bolt Long bar... - Page 30 Flat washer D12 Flat washer D10 Flat washer D8 Flat washer D6 Spring washer M10 Long bolt M12X145 Fixed plate on the cover Fixed plate under cover Chain...
-
Page 31: Exploded Drawing
Exploded Drawing... -
Page 32: Warranty
WARRANTY Training equipment from Darwin® is subject to strict quality control. However, if a fitness equipment purchased from us does not work perfectly, we take it very seriously and ask you to contact our customer service as indicated. We are happy to help you by phone via our service hotline. Error Descriptions Your fitness equipment is developed for long-term, high-quality training. - Page 33 Warranty Conditions For the warranty to be valid, the following steps must be taken: Please contact our customer service by email or phone. If the product under warranty has to be sent in for repair, the seller bears costs. After expiry of the warranty, the buyer bears the costs of transport and insurance.
-
Page 34: Contact
CONTACT TECHNICAL SUPPORT TECHNICAL SUPPORT & SERVICE TECHNICAL SUPPORT & SERVICE �� �� �� +49 4621 4210-900 80 90 16 50 +33 (0) 172 770033 +49 4621 4210-945 +49 4621 4210-933 �� +49 4621 4210-698 �� �� info@fitshop.dk service-france@fitshop.fr �� technik@sport-tiedje.de ��... - Page 35 LIVE FITNESS WEBSHOP AND SOCIAL MEDIA Sport-Tiedje is Europe’s largest specialist store for www.sport-tiedje.co.uk home fitness equipment with currently 80 stores www.sport-tiedje.de/blog and one of the world’s most renowned online mail order companies for fitness equipment. Private customers order via the 25 web shops www.facebook.com/SportTiedje in the respective national language or have their desired equpiment assembled on site.
- Page 36 Notes...
- Page 37 Notes...
- Page 38 Notes...