Table of Contents
Advertisement
Step 6:
Step 7
Assembling the cable - Part 2
1.
String the cable (21) through the pulley (32) and fasten it onto upper frame (3) with one screw
(50), two washers (64) and one nut (61).
2.
String the cable (21) through the pulley (32) and fasten it on the main frame (1) with one screw
(49), two spacers (37), two washers (64) and one nut (61).
3.
String the cable (21) through the pulley (32) and fasten it along with the pulley covers (31) and
two pulley supports (28) with one screw (50), two washers (64) and one nut (61) (see fig. C-C).
NOTICE
L
This pulley will be hanging in the air and will be connected to the pulley system in Part 3 of the
assembling the cable.
4.
String the cable (21) through the pulley (32) and fasten it along with the pulley covers (31) onto
the upper frame (3) with one screw (50), two washers (64) and one nut (61).
5.
Fasten the end of the cable (21) onto the weight selector pole (24) with one screw (55), two
washers (65) and one nut (62).
18
Advertisement
Table of Contents
